Stainless Steel Outboard Motor Bracket Mount Heavy Duty Auxiliary Marine Boat 10 Hp, 2 Stroke
- Designed for use with power or sail boats. Manual lifting required to raise and lower your motor. Designed for motors up to 10hp or 80 lbs max weight. Stainless steel construction is non-corrosive for saltwater use. 14″ travel do not use with 4 stroke engine, use safety cable.
Outboard Motor Wall Storage Bracket, Compact Lightweight Storage Stand, Me-165
- Carbon steel construction with black texture powder coat finish 8″l x 35″w x 12″h. Customizable load capacity based on type and length of board (2″x8″, not included). Use your walls for storage, free up valuble floor space by storing multiple motors on these convenient brackets. Out of the way storage for clamp-on outboards, easily mounted to a wall (hardware not included) with an easy to access bolt pattern. Made in the usa, we are proud to manufacture our products in zeeland, michigan at our small business facility.
X-Haibei Outboard Motor Bracket Auxilary Up To 20HP Marine Boat Stainless Steel
- Transom mount locks and holds the outboard motor up or lowers the motor down for propulsion. The height of the outboard bracket on power boats should be localted so that the cavitation plate is nearly flush with the bottome of the boat immediately forward of the engine being mounted. The completed installation should result in the cavitation plate of the outboard motor being parallel to the surface of the water.
Marinetech 55-0021 Aluminum Marine Outboard Motor Bracket
- Manual operation means no power is required to raise and lower your auxiliary outboard. Fresh water use on both power boats and sail boats. Features transom adapter required heavy-duty aluminum construction fits motors up to 20 horse power at 115 pounds max. Outboard aluminum motor bracket, up to 20 horse power the adjustable outboard motor bracket is designed from heavy duty, light weight aluminum.
M-ARINE BABY Aluminum Marine Boat Outboard Motor Mounting Bracket – Black Mounting Plate
- Featurestrolling auxiliary motors enable retractable bracket on power and sailboats with ease. Mounting size 5-1/4″ 9″ (133. Durable and it fits small to medium sized powerboats and yachts. Mounting broad size 8-1/4″ 10-3/8″ (210mm264mm). Outboard motor bracket is most suitable for 2-stroke motors 7 1/2 hp to 20 hp. 35mm228. Suitable for small to medium sized powerboats and yachts. 93″ (100mm). M-arine baby aluminum outboard motor bracket heavy-duty aluminum construction and comes with a solid polypropylene mounting board. 314″ (8mm). Specifications mounting holes 0. 6mm). Includes lift and lower heavy duty springs. Lift range 13 3/8″ (340mm). Horizontal distance of mounting holes (c-to-c) 3. The maximum weight of 115lbs. Spring loaded, with 5 vertical position, adjustable bracket.
M-ARINE BABY Aluminum Marine Boat Outboard Motor Mounting Bracket – White Mounting Plate
- Spring loaded, with 5 vertical position, adjustable bracket. Horizontal distance of mounting holes (c-to-c) 3. 93″ (100mm). Lift range 13 3/8″ (340mm). Featurestrolling auxiliary motors enable retractable bracket on power and sailboats with ease. 35mm228. Outboard motor bracket is most suitable for 2-stroke motors 7 1/2 hp to 20 hp. Includes lift and lower heavy duty springs. Specifications mounting holes 0. M-arine baby aluminum marine boat outboard motor mounting bracket, white mounting plate heavy-duty aluminum construction and comes with a solid polypropylene mounting board. Mounting size 5-1/4″ 9″ (133. 6mm). 314″ (8mm). Durable and it fits small to medium sized powerboats and yachts. Suitable for small to medium sized powerboats and yachts. The maximum weight of 115lbs. Mounting broad size 8-1/4″ 10-3/8″ (210mm264mm).
Garelick/Eez-In 71033:01 Stainless Steel Auxiliary Outboard Motor Bracket for 2-Stroke Motors – Over 7.5 HP to 25 HP
- Transom mount locks and holds motor up or swings down for propulsion, built in transom angle adjustment allows optimum motor performance. Fits all style motors – extra wide (11 1/2″ 29cm) black poly mounting board for newer, wider style motor locking clamps. Pedestal system stowable. Easier to lift and lower &ndash stainless springs help counterbalance motor weight. Made of tough 304 stainless steel. 4 position locking height adjustment, wide track body for added stability. Comes in a 4 piece set.
Norestar Outboard Motor Bracket/Kicker Mount (up to 20 Horsepower)
- 5″ of vertical lift and can accommodate both short shaft and long shaft outboard motors. 75″x5. Specifications mounting bracket dimensions 5. This norestar outboard motor bracket will allow you to raise and lower your trolling motor easily. 5″ weight capacity 110 lbs vertical lift 10. 5″ warranty 2 years. Very little mounting space is required and mounts easily on nearly any transom and is ideal for a variety of boats including aluminums, fiberglass boats, canoes, and nearly any other boat. The high density mounting board will support motors up to 110 lbs. The twist knob locks the motor securely in place. Refer to the mounting bracket dimensions in the specifications listed below to ensure you have the required mounting space. Requires four stainless bolts/nuts for installation (not included due to the variety of transom depths — available from any hardware store). Each kicker mount has 10. The mount has 4 locking positions and fits nearly any outboard motor (refer to the model number of hp rating and capacity).
Marinetech 55-0027 Fixed Outboard Marine Motor Bracket
- Measures 8 1/2 inch setback and weight is 13 pounds. In addition, the model 27 has a 5 inch height adjustment to accommodate short shaft motors. Marinetech fixed outboard marine motor bracket is a heavy-duty aluminum bracket designed to hold 2 and 4 stroke motors weighing up to 150 pounds.
MarineTech Products 55-0012 12 HP Aluminum Outboard Motor Bracket
- Locks motor in an up or into down position for propulsion. Heavy-duty aluminum construction. Vertical travel of 11-1/4″. Hp rating, 20 hp/115 lbs. Mounting size, 5-1/4″ x 9″.
Marine Stainless Steel Auxiliary Outboard Motor Bracket FOR 2-STROKE MOTORS – Up To 25hp (Stainless Steel – Black)
- Easier to operate with 5 vertical running position lock bar to compensate for water surface and boat load conditions twist lock safety knobs secure bracket in place. 10 1/4inch long 7 1/2 inch wide white poly mounting board for new, wider style motor locking clamps accommodates long or short shaft motors. Mounting board measures 10 1/4inch(l) x 75 in (w) x 1 1/4inch(h). Hp rating of 30 motor weights not to exceed 169 pounds and a vertical travel of 95inch. Easier to hold with handle designed to accept most style outboard motor locks steel body resists corrosion while the 1 1/4.
Marinetech 55-0010 Stainless Steel Marine Outboard Motor Bracket
- •❸easier to hold with handle designed to accept most style outboard motor locks steel body resists corrosion while the 1 1/4. Fits motors up to 10 horse power at 80 pounds maximum. •❹Hp rating of 30 motor weights not to exceed 169 pounds and a vertical travel of 95inch. •❷Easier to operate with 5 vertical running position lock bar to compensate for water surface and boat load conditions twist lock safety knobs secure bracket in place. •❺Mounting board measures 10 1/4inch(l) x 75 in (w) x 1 1/4inch(h).
Trac Outdoor T10052 Aluminum Outboard Motor Bracket
- Stainless steel springs counter-balance motor weight transom bracket locks and holds motor in up position or safely pivots down for propulsion rugged 2” thick polymer motor pad wide board for 4-stroke motors (2-stroke and electric motors for t10050) 4-position locking height adjustment stainless steel hardware installation instruction 2 year manufacturer’s warranty due to size/weight there may be additional shipping charges outside of the contiguous usa. These brackets have integrated transom angle adjustment, allowing optimum motor positioning. 25″ quickly and easily lift your auxiliary motor with the trac retractable outboard motor brackets in marine-grade anodized aluminum alloy. Travel distance is 11.
Amarine-made Stainless Steel Outboard Motor Bracket 10 Hp, 2 Stroke
- 14″ travel do not use with 4 stroke engine, use safety cable. Manual lifting required to raise and lower your motor. Designed for use with power or sail boats. Designed for motors up to 10hp or 80 lbs max weight. Stainless steel construction is non-corrosive for saltwater use.
Stainless Steel Outboard Auxiliary Motor Bracket- 20hp
- Stainless steel, spring loaded 4 vertical position) adjustable bracket. Solid polypropylene mounting board, wide track body for added stability. Easy to lift and lower, stainless springs help counterbalance motor weight. Suits 2-stroke motors 7 1/2, 20 hp, with a maximum weight of 52kg (115lbs). Heavy duty with reinforced welded frame and stamped stainless components.
M-ARINE BABY Stainless Steel Outboard Motor Bracket 10 Hp, 2 Stroke
- Fits motors up to 10 horse power at 80 pounds maximum. Stainless steel construction is non-corrosive for saltwater use. Manual lifting required to raise and lower your motor. Designed for use with power or sail boats. 14″ travel do not use with 4 stroke engine, use safety cable.
Outboard Motor Bracket , Marine Stainless Steel Auxiliary Kicker Mount Up To 25hp for 2-Stroke Boat Motors by spareflying (Black)
- •❷Easier to operate with 5 vertical running position lock bar to compensate for water surface and boat load conditions twist lock safety knobs secure bracket in place. •❸Easier to hold with handle designed to accept most style outboard motor locks steel body resists corrosion while the 1 1/4. •❶10 1/4inch long 7 1/2 inch wide white poly mounting board for new, wider style motor locking clamps accommodates long or short shaft motors. •❹Hp rating of 30 motor weights not to exceed 169 pounds and a vertical travel of 95inch. •❺Mounting board measures 10 1/4inch(l) x 75 in (w) x 1 1/4inch(h).
SeaLux 20 HP 2 Stroke Motors OUTBOARD AUXILIARY STAINLESS MOTOR BRACKET
- Solid polypropylene mounting board. Suits 2-stroke motors 7 1/2, 20 hpideal for small to medium sized powerboats and yachts. Easy to lift and lower, stainless springs help counterbalance motor weight wide track body for added stability. Marine grade 304 stainless steel, spring loaded (5 vertical position) adjustable bracket. Heavy duty with reinforced welded frame and stamped stainless components.
Panther 55-0028 4-Stroke Fixed-Mount Outboard Motor Bracket
- It has a rugged polypropylene mounting board. Maximum weight is 119 kilograms. Includes stainless steel mounting hardware and safety cable. Works with 4 and 2-stroke motors up to 35 horsepower and 263 pounds.
U-BCOO Bracket & Hinge Assembly Electric Trolling Motor Stent Electric Outboard Motor Stent
- U-bcoo brackets and hinge assemblies are complete hinges for most single 1/8 “diameter rotor motors for all types of electric boats, electric outboard motors (55 lb thrust and descending) surge (55 lb thrust and descent) the.
Garelick/EEz-In 71056:01 Marine Stainless Steel Auxiliary Outboard Motor Bracket FOR 2-STROKE MOTORS
- Easier to lift and lower, stainless steel springs help counterbalance motor weight. Motor brackets for up to 20 hp. Fits all style motors, extra wide (115 inch) black poly mounting board for newer wider style motor locking clamps. Transom mount locks and holds motor up or swings down for propulsion. Built-in transom angle adjustment allows optimum motor performance.
Garelick/Eez-In 71074:01 Stationary Outboard Motor Bracket – Vertical Transom Mount
- Motor weight up to 75 lbs. For motors up to 15 hp. Fixed height for auxiliary or trolling motor & 2 stroke. 1 1/2″ (4cm) black poly mounting board. 304 stainless brackets and hardware.
MagiDeal Aluminum Inflatable Boat Fishing Dinghy Motor Transom Plate Outboard Mount Engine Bracket
- 6 inch, width approx. Thanks. Description, lightweight and durable, easy to install and convenient to use, transom plate outboard mounting engine bracket for inflatable boat, kayak, canoe, dinghy, yacht fishing and so on, material aluminum, length approx. 28 inch, color blackpackage includes1 piece boat transom platenoteplease allow slightly difference due to manual measurement. 5 cm/11. 7 cm/0. Color may be slightly different since different monitor. 10. 1 inch, height approx. 5 cm/4. 29.
SeaSense Motorbracket 15-20 Hp Outboard Stationary
- Stationary outboard motorbracket, 15-20 hp, bulk.
Garelick/Eez-In 71075:01 Stationary Outboard Motor Bracket – Vertical Transom Mount (Adjustable +/- 7°)
- Fixed height for auxiliary or trolling motor &ndash 2 stroke. Motor weight up to 75 lbs. Pedestal system stowable. 1 1/2″ (4cm) black poly mounting board – 8″ (20cm) width. Motor weight up to 75 lbs. 304 stainless brackets and hardware. Comes in a 4 piece set. For motors up tomotor weight up to 75 lbs 15 hp. For motors up to motor weight up to 75 lbs 15 hp.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
