Minn Kota Trolling Motor Aluminum Upper Shaft 42/45in. Shaft #2772012
- Soft touch material added in the motor head and propeller area for extra strength and abrasion resistance. Made with surlast all weather fabric same as used by many boat manufactures for their covers. The only cover of its kind on the market “made in the usa”. 1/4″ bungee cord runs through cover to keep it tight no draw strings to flap in the wind and leave marks on your boat. Trolling motor aluminum upper shaft for 42 and 45 inch models.
Minn Kota Maxxum 80 Bow-Mount Trolling Motor with Foot Control and Bowguard (80-lb. Thrust, 42″ Shaft)
- Bowgaurd 360 mount breaks away at any angle and automatically resets. Maximizer gives up to five times longer run time on a charge. Responsive cable steering. Minn-kota trolling motor, owners manual, warranty card.
Minn-Kota TROLLING MOTOR, MINN KOTA, FORTREX
- Fortrex’s innovative mono-arm design features an extruded, anodized aluminum, structural beam that operates with no metal-to-metal contact and 75% less torsion. With fewer moving parts, tighter tolerances and less give, fortrex is the beefiest, meanest, quietest motor ever. The removable bowguard 360°™ also features a dual bearing system that eliminates noise and allows for improved breakaways from any directional indicator, fortrexthe easy-to-read, illuminated directional indicator leaves no doubt about where you’re headedfoot pedalget wired to the water with our ultra-responsive foot pedal. It features a stainless steel, nitrogen-charged gas spring to get you in and out of the water with bowguard 360°lifting the motor and bowguard off of the mount is now even easier on fortrex, just remove a single cap screw. Weedless wedge™ 2 feat. In this case, it’s a revolution. You’ll stay on the water up to five times longer on a single wedge 2 proppush weeds away and take on the thick stuff without battery-draining chopping and hacking. On the water, that translates to a motor with no play, no give, reduced steering torque and silent ‘s lift-assist design cuts the weight of stow and deploy in half, making it as easy as lifting your suv tailgate. Its new design is easier to operate, with more room for your foot and more exact speed = maximizerdigital maximizer™ controls and optimizes power to extend battery life and reduce damaging heat. Fortrexfreshwater bow mountwe left the solid, extruded aluminum arm on the new fortrex™ exposed, so everyone on the water can see what they’re up against the most ruthless mount we’ve ever unleashed. Consider yourself designsometimes, the simplest solution is best. A single hinge point and rear pivot bearing with 20% more surface area deliver less wear, longer life, and quieter operation than traditional motor stabilizer (cts)cts uses an integrated spring that applies force whether the motor’s stowed or deployed.
Minn Kota Trolling Motor Cover By PoppTops Fits Riptide SP w/ 48″ shaft. Black
- The only cover of its kind on the market “made in the usa”. 1/4″ bungee cord runs through cover to keep it tight no draw strings to flap in the wind and leave marks on your boat. Soft touch material added in the motor head and propeller area for extra strength and abrasion resistance. Made with surlast all weather fabric same as used by many boat manufactures for their covers. Designed to protect your investment from mother nature and the road.
Minn-Kota EM 80 Engine Mounted Trolling Motor (80lbs of Thrust)
- Minn-kota trolling motor, mounting hardware, owners manual, warranty card. Hidden mount will not interfere with boat or motor performance. Digital maximizer allows this motor to run up to 5 times longer on a charge. 2 yr limited warranty. Electronics are housed in a fully waterproof control module.
Minn Kota Maxxum 70 Bow-Mount Trolling Motor with Foot Control and Bowguard (70-lb Thrust, 42″ Shaft)
- Digital maximizer allows this motor to run up to 5 times longer on a charge. 2 yr limited warranty. Weedless wedge 2 prop allows you to pass through heavy vegetation at any speed. Responsive cable steering. Minn-kota trolling motor, mounting hardware, owners manual, warranty card.
Minn Kota Riptide Trolling Motor 52in. Shaft #2002014
- For all round shaftriptide models. Made with surlast all weather fabric same as used by many boat manufactures for their covers. The only cover of its kind on the market “made in the usa”. 1/4″ bungee cord runs through cover to keep it tight no draw strings to flap in the wind and leave marks on your boat. Soft touch material added in the motor head and propeller area for extra strength and abrasion resistance.
Minn Kota Trolling Motor T-Bar for Endura Models #2063605
- This fits the camo and endura 12v models. Made with surlast all weather fabric same as used by many boat manufactures for their covers. The only cover of its kind on the market “made in the usa”. 1/4″ bungee cord runs through cover to keep it tight no draw strings to flap in the wind and leave marks on your boat. Soft touch material added in the motor head and propeller area for extra strength and abrasion resistance.
Minn Kota Trolling Motor Cover By PoppTops Fits Riptide ST w/ Lift Assist and 60″ shaft. Black
- Made with 600 d solution dyed polyester all weather fabric same as used by many boat manufactures for their covers. Designed to protect your investment from mother nature and the road. Soft touch material added in the motor head and propeller area for extra strength and abrasion resistance. The only cover of its kind on the market “made in the usa”. 1/4″ bungee cord runs through cover to keep it tight no draw strings to flap in the wind and leave marks on your boat.
Minn Kota Trolling Motor Cover By PoppTops Fits Terrova w/ Lift Assist and 60″ shaft. Black
- Designed to protect your investment from mother nature and the road. Made with 600 d solution dyed polyester all weather fabric same as used by many boat manufactures for their covers. The only cover of its kind on the market “made in the usa”. 1/4″ bungee cord runs through cover to keep it tight no draw strings to flap in the wind and leave marks on your boat. Soft touch material added in the motor head and propeller area for extra strength and abrasion resistance.
Minn Kota Trolling Motor Foot Control Gear Indicator Kit
- Ncludes decal top cover pointer and gear that mounts in bottom cover of trolling motor head. Fits maxxum, all terrain, edge and maxxum pro models.
Minn Kota Trolling Motor Cover By PoppTops Fits PowerDrive w/ 48″ shaft.
- Designed to protect your investment from mother nature and the road. 1/4″ bungee cord runs through cover to keep it tight no draw strings to flap in the wind and leave marks on your boat. Made with surlast all weather fabric same as used by many boat manufactures for their covers. Soft touch material added in the motor head and propeller area for extra strength and abrasion resistance. The only cover of its kind on the market “made in the usa”.
MinnKota Trolling Motor Power Center
- Motor center ideal for small-boat transom applications. Built-in battery meter displays current “state of charge”. Offers pair of 12-volt accessory plugs and manual reset circuit breakers. Battery holder/case only battery not included. Easy-access batter terminals for connecting leads. Designed to fit group 24- and 27-size batteries.
Minn Kota Trolling Motor Foot Control Gear Set
- Minn kota foot control trolling motor gear set you get two gears per sale fits maxxum, all terrain, edge and maxxum pro models.
Minn Kota Trolling Motor Powerdrive V2 Autopilot Drive Housing Assy. #2771826
- Please note that this will only work with powerdrive v2 models. For v2 motors 2006 and newer with serial number mkag and higher.
Minn Kota Trolling Motor Cover By PoppTops Fits Riptide ST w/ Lift Assist and 54″ shaft. Black
- The only cover of its kind on the market “made in the usa”. Designed to protect your investment from mother nature and the road. Soft touch material added in the motor head and propeller area for extra strength and abrasion resistance. Made with 600 d solution dyed polyester all weather fabric same as used by many boat manufactures for their covers. 1/4″ bungee cord runs through cover to keep it tight no draw strings to flap in the wind and leave marks on your boat.
MINN KOTA TROLLING MOTOR PLUG & RECEPTACLE
- Universal design for 2 or 3 wire configurations on 12 to 36 volt systems. Requires a standard 1 1/8″ diameter mounting hole. Box dimensions 2h x 5w x 9l weight 03lbs. Watertight sealing cap and corrosion-resistant, plated brass electrical components. Locks into receptacle for a watertight seal.
Minn Kota Endura C2 30 Freshwater Transom Mounted Trolling Motor (30″ Shaft)
- 5 forward speeds, 3 reverse speeds for maximum control. Cool quiet power maximizes battery life and doesn’t spook fish. Indestructible composite shaft backed my a lifetime warranty two year warranty covers the motor. 6-inch telescoping handle and tilt twist tiller for ergonomic speed control and steering lever lock bracket offers a rock solid mount. 12-volt freshwater transom-mounted trolling motor with a thrust level of 30 and a 30-inch shaft.
Minn Kota Maxxum 80 Bow-Mount Trolling Motor with Foot Control and Bowguard (80-lb Thrust, 52″ Shaft)
- Features responsive cable steering and a lighted, easy-to-see directional indicator. This model is equipped with 80lbs of thrust and a 52″ shaft. You’ll find more maxxum trolling motors on the bows of serious fishermen than any other motor on the water.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
