Best and Coolest 15 Picatinny Rings

 

UTG Pro RWU012515 UTG PRO US Made 12PCs Medium Profile POI Picatinny Rings
UTG Pro RWU012515 UTG PRO US Made 1″/2PCs Medium Profile POI Picatinny Rings
UTG Pro RWU012515 UTG PRO US Made 1″/2PCs Medium Profile POI Picatinny Rings - Precision milled integral recoil stop seats into picatinny slots eliminating the possibility of forward and aft movement from recoil vibrations. Original snag-free contoured profile with reduced weight and size machined from 6061 aluminum alloy and 4605 steel with matte black hard coat anodizing. Flush-fitting locking plate interface with dual spring loaded guide rods and torx screw locking ensures secure and repeatable zero hold. Medium profile precision optics interface (poi) rings have a 277mm center height to fit optics with a o1 inch tube, and up to a o55mm outer objective. Progressively machined for a precise inner diameter scope interface to achieve a seamless ring -to-scope interaction.

 

99692 Weaver Tactical Ring 6-Hole Picatinny 30mm Short
99692 Weaver, Tactical Ring 6-Hole Picatinny, 30mm Short
99692 Weaver, Tactical Ring 6-Hole Picatinny, 30mm Short - Available in 1″ and 30mm diameters. Six screws for extra security and clamping pressure. Type-3 hard coat anodized finish. Hunting scopes rings. Improved crossbolt from weaver to picatinny spec. Another quality bushnell product. Increase height options for broad applications and firearms. Made of the highest quality materials.

 

UTG ACCU-SYNC 1 Medium Profile 50mm Offset Picatinny Rings
UTG ACCU-SYNC 1″ Medium Profile 50mm Offset Picatinny Rings
UTG ACCU-SYNC 1″ Medium Profile 50mm Offset Picatinny Rings - Designed with significant lightening cuts to massively reduce weight without compromising durability. 18mm saddle height, 50mm offset distance, 100mm base length, medium profile fits 1″ tube optics with up to a 61mm outer objective diameter. Radiused edges and corners to prevent snagging, scratching, or tearing of other gear and for effortless access to scope windage and elevation turrets. Precision cnc machined from aircraft grade aluminum with a matte black anodize, designed to fit on mil-std-1913 picatinny rail platform. Single mount utilizes locking torx screws and square-shaped integral recoil stops for a secure zero hold.

 

Soft Air Swiss Arms 4x32 rifle scope with weaverpicatinny rings
Soft Air Swiss Arms 4×32 rifle scope with weaver/picatinny rings
Soft Air Swiss Arms 4×32 rifle scope with weaver/picatinny rings - Magnify targets 4 times for taking long range shots. Easy to adjust no tool required. Standard 1-inch rubber finish body. Included lens covers and weaver/picatinny rings.

 

UTG 30mm2PCs Med Pro Max Strength Picatinny Rings22mm Wide
UTG 30mm/2PCs Med Pro Max Strength Picatinny Rings,22mm Wide
UTG 30mm/2PCs Med Pro Max Strength Picatinny Rings,22mm Wide - Optimized dimensions for best fit on all picatinny/weaver rails. 4-screw low profile “tiger” ring, hined from aircraft aluminum alloy with maximum strength. Strong recoil stop cross bolt for optimized fit and zero. Twist lock design for quick and user friendly easy installation. Light weight with see-through tunnel and slot cut on ring top, high quality synthetic protective tape on rings inner surface to protect your equipment.

 

UTG Accu-Sync 34mm High Pro 50mm Offset Picatinny Rings
UTG Accu-Sync 34mm High Pro. 50mm Offset Picatinny Rings
UTG Accu-Sync 34mm High Pro. 50mm Offset Picatinny Rings - Designed with significant lightening cuts to massively reduce weight without compromising durability. Precision cnc machined from aircraft grade aluminum with a matte black anodize, designed to fit on mil-std-1913 picatinny rail platform. 22mm saddle height, 50mm offset distance, 100mm base length, high profile fits 34mm tube optics with up to a 77mm outer objective diameter. Radiused edges and corners to prevent snagging, scratching, or tearing of other gear and for effortless access to scope windage and elevation turrets. Single mount utilizes locking torx screws and square-shaped integral recoil stops for a secure zero hold.

 

UTG 34mm2PCs Med Profile Steel Picatinny Rings 16mm Wide
UTG 34mm/2PCs Med. Profile Steel Picatinny Rings, 16mm Wide
UTG 34mm/2PCs Med. Profile Steel Picatinny Rings, 16mm Wide - Utilizes locking torx screws and square-shaped integral recoil stop for a secure zero hold, fits optics with up to a 63 mm outer objective diameter. Radiused edges and corners to prevent snagging, scratching, or tearing of other gear and for effortless access to scope windage and elevation turrets. Upper and lower ring portions precision machined from one solid block of steel to strict tolerances for optimal fit. Heat treated qpq nitride matte black finish for strength and added weather and wear resistance. Progressively machined for a precise inner ring diameter to achieve optimal tube alignment inner surface with groove cuts to guarantee tube retention.

 

UTG Pro Us Made 30mm2PCS Medium Profile POI Picatinny Rings
UTG Pro Us Made 30mm/2PCS Medium Profile POI Picatinny Rings
UTG Pro Us Made 30mm/2PCS Medium Profile POI Picatinny Rings - Original snag-free contoured profile with reduced weight and size. Precision machined inner ring surface interfaces with scope tube to achieve a seamless ring-to-scope interaction. Flush-fitting locking plate interface with dual spring loaded guide rods and torx screw locking ensures secure and repeatable zero hold. Designed to fit on mil-spec 1913 picatinny rail platforms, machined from 6061-t6 aluminum alloy and 4605 steel with matte black hard coat anodizing. Medium profile, 30mm center height, precision optics interface (poi) rings fit optics with a 30mm tube and up to a 59mm outer objective diameter.

 

UTG 12PCs Med Profile Steel Picatinny Rings 16mm Wide
UTG 1″/2PCs Med. Profile Steel Picatinny Rings, 16mm Wide
UTG 1″/2PCs Med. Profile Steel Picatinny Rings, 16mm Wide - Utilizes locking torx screws and square-shaped integral recoil stop for a secure zero hold, fits optics with up to a 55 mm outer objective diameter. Heat treated qpq nitride matte black finish for strength and added weather and wear resistance. Progressively machined for a precise inner ring diameter to achieve optimal tube alignment inner surface with groove cuts to guarantee tube retention. Upper and lower ring portions precision machined from one solid block of steel to strict tolerances for optimal fit. Radiused edges and corners to prevent snagging, scratching, or tearing of other gear and for effortless access to scope windage and elevation turrets.

 

UTG Accu-Sync 1 Medium Profile 34mm Offset Picatinny Rings
UTG Accu-Sync 1″ Medium Profile 34mm Offset Picatinny Rings
UTG Accu-Sync 1″ Medium Profile 34mm Offset Picatinny Rings - Designed with significant lightening cuts to massively reduce weight without compromising durability. 18mm saddle height, 34mm offset distance, 100mm base length, medium profile fits 1 inch tube optics with up to a 61mm outer objective diameter. Precision cnc machined from aircraft grade aluminum with a matte black anodize, designed to fit on mil-std-1913 picatinny rail platform. Radiused edges and corners to prevent snagging, scratching, or tearing of other gear and for effortless access to scope windage and elevation turrets. Single mount utilizes locking torx screws and square-shaped integral recoil stops for a secure zero hold.

 

Weaver 6-Hole 1-Inch Medium Picatinny Rings
Weaver 6-Hole 1-Inch Medium Picatinny Rings
Weaver 6-Hole 1-Inch Medium Picatinny Rings - For scopes with a 1″ tube diameter. Hunting scopes rings. Picatinny spec crossbolt. Another quality bushnell product. Made of the highest quality materials. Type-3 hard coat anodized finish. Medium height rings fit most scopes with a 40mm objective lens. Six screws for extra security and clamping pressure.

 

UTG Pro High Profile POI Picatinny Rings 2 Piece 1
UTG Pro High Profile P.O.I Picatinny Rings (2 Piece), 1″
UTG Pro High Profile P.O.I Picatinny Rings (2 Piece), 1″ - Precision milled integral recoil stop seats into picatinny slots eliminating the possibility of forward and aft movement from recoil vibrations. Flush-fitting locking plate interface with dual spring loaded guide rods and torx screw locking ensures secure and repeatable zero hold. High profile precision optics interface (poi) rings have a 33mm center height to fit optics with a o1 inch tube, and up to a o65mm outer objective. Original snag-free contoured profile with reduced weight and size machined from 6061 aluminum alloy and 4605 steel with matte black hard coat anodizing. Progressively machined for a precise inner diameter scope interface to achieve a seamless ring -to-scope interaction.

 

UTG 12PCs Med Pro Max Strength Picatinny Rings 25mm Wide
UTG 1″/2PCs Med Pro Max Strength Picatinny Rings, 25mm Wide
UTG 1″/2PCs Med Pro Max Strength Picatinny Rings, 25mm Wide - Twist lock design for quick and user friendly easy installation. Strong recoil stop cross bolt for optimized fit and zero. 6-screw medium profile “dragon” ring, machined from aircraft aluminum alloy with maximum strength. Light weight with see-through tunnel and slot cut on ring top, high quality synthetic protective tape on rings inner surface to protect your equipment. Optimized dimensions for best fit on all picatinny/weaver rails.

 

UTG 30mm2PCs Low Pro Max Strength Picatinny Rings22mm Wide
UTG 30mm/2PCs Low Pro Max Strength Picatinny Rings,22mm Wide
UTG 30mm/2PCs Low Pro Max Strength Picatinny Rings,22mm Wide - Optimized dimensions for best fit on all picatinny/weaver rails. Strong recoil stop cross bolt for optimized fit and zero. Twist lock design for quick and user friendly easy installation. Light weight with see-through tunnel and slot cut on ring top, high quality synthetic protective tape on rings inner surface to protect your equipment. 4-screw low profile “tiger” ring, hined from aircraft aluminum alloy with maximum strength.

 

Sniper PT-25H4 1 High Profile Scope Rings for PicatinnyWeaver Rail with 4 Fasten Screws for More Security
Sniper PT-25H4 1″ High Profile Scope Rings for Picatinny/Weaver Rail with 4 Fasten Screws for More Security
Sniper PT-25H4 1″ High Profile Scope Rings for Picatinny/Weaver Rail with 4 Fasten Screws for More Security - Anodized black matte finish, with 3mm allon wrench and extra screw. Made of aircraft-grade aluminum alloy. Fits any picatinny/weaver rail. A   1″    b   21mm  c    18mm.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.