Best 21 Picatinny Rail Scope Mounts

 

EGW Tikka T3 Picatinny Rail Scope Mount 20 MOA -  Black #ad
EGW Tikka T3 Picatinny Rail Scope Mount 20 MOA – Black
EGW Tikka T3 Picatinny Rail Scope Mount 20 MOA – Black #ad - Also, in many cases, it will not obstruct usage of factory iron sights. This mount is a picatinny-style base and compatible with picatinny or weaver scope rings. The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the usa. Add egw’s practical or hd scope rings to make it a complete overhaul we machine these in our shop using one of our usa-made fadal machining centers. Our tikka t3 mount is provided with standard 6-48 screws, as tikkas produced after 2004 are drilled at tapped for 6-48 screws. After machining, the mounts are tumbled, sand blasted, and type ii anodized for long lasting durability. Your gun may require metric screws. Installation egw recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately). If you require metric screws, please select that option. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Egw’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike. We are happy to provide whichever size screws you need. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories.

 

EGW Remington Picatinny Rail Scope Mount 4 Hole Short Action 0 MOA #ad
EGW Remington Picatinny Rail Scope Mount, 4 Hole, Short Action, 0 MOA
EGW Remington Picatinny Rail Scope Mount, 4 Hole, Short Action, 0 MOA #ad -  Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The 4 hole mount is for the newer versions with 4 holes. Custom silver anodizing is available upon request, at an additional charge of $15 (there is also a 3 month lead time associated with silver anodizing. Installation egw recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately). Overall length 5. 488″. This mount is available with a 0 or 20 moa. Add egw’s practical or hd scope rings to make it a complete overhaul available in matte black.  The 3 hole mount is made for older versions with 3 holes. Egw’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike. Machined from domestic 6061 t6 extruded aluminum. Center spread 3.  Also, in many cases, it will not obstruct usage of factory iron sights. Hardware hex head screws and wrench provided. Please see our faq section for more information on action lengths and moa.  Please give us a call if you’d like to place a custom order). The bolt pattern on this mount will fit the remington xp/xr 100 and the remington 7. This mount is a picatinny-style base and compatible with picatinny or weaver scope rings. 351″. Finish matte black. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average.

 

ohhunt Scope Rings High Profile 254mm 30mm Cantilever Double Rings Side Picatinny Rail Scope Mounts 20mm Weaver #ad
ohhunt Scope Rings High Profile 25.4mm 30mm Cantilever Double Rings Side Picatinny Rail Scope Mounts 20mm Weaver
ohhunt Scope Rings High Profile 25.4mm 30mm Cantilever Double Rings Side Picatinny Rail Scope Mounts 20mm Weaver #ad - Precision machined from aircraft-grade aluminum alloy. Bidirectional design to offer needed offset in diverse applications. Fit on any picatinny rail. With bubble level and compass and ring side picatinny rail.

 

EGW Remington 660600 Mohawk Picatinny Rail Scope Mount 0 MOA #ad
EGW Remington 660/600 Mohawk Picatinny Rail Scope Mount 0 MOA
EGW Remington 660/600 Mohawk Picatinny Rail Scope Mount 0 MOA #ad - Center spread 3. Available in matte black. This mount is a picatinny-style base and compatible with picatinny or weaver scope rings.  Please give us a call if you’d like to place a custom order). Add egw’s practical or hd scope rings to make it a complete overhaul . Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Installation egw recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately). Custom silver anodizing is available upon request, at an additional charge of $15 (there is also a 3 month lead time associated with silver anodizing. 882″.  . This mount is available with a 0 or 20 moa. 633″.  Also, in many cases, it will not obstruct usage of factory iron sights. Machined from domestic 6061 t6 extruded aluminum.  . The bolt pattern on this mount works with the remington 600 and 660 mohawk rifles. This mount comes standard with a bevel on both sides making it ambidextrous. Egw’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike. Overall length 5. Please see our faq section for more information on action lengths and moa. Finish matte black hardware hex head screws and wrench provided.

 

EGW Ruger 10-22 Picatinny Rail Scope Mount 0 MOA #ad
EGW Ruger 10-22 Picatinny Rail Scope Mount, 0 MOA
EGW Ruger 10-22 Picatinny Rail Scope Mount, 0 MOA #ad - Egw scope base ruger 10-22 picatinny railstyle 1-pc mil-std 1913 picatinny finish black-matte material aluminum alloy type of rings needed mil-std 1913 picatinny rings included n other features made in usa manufacturer evolution gun worksmodel no 46100.

 

Savage Mark II 1-38 Ejection Port Picatinny Rail Scope Mount 20 MOA #ad
Savage Mark II (1-3/8″ Ejection Port) Picatinny Rail Scope Mount 20 MOA
Savage Mark II (1-3/8″ Ejection Port) Picatinny Rail Scope Mount 20 MOA #ad - Egw scope base savage mark ii picatinny rail 20moastyle 1-pc mil-std 1913 picatinny finish black-matte material aluminum alloy type of rings needed mil-std 1913 picatinny rings included n other features made in usa, for savage mark ii with 1-3/8″ ejection port manufacturer evolution gun worksmodel no 41502.

 

Ulightfire 25430mm in Diameter Mount Ring with Extension Picatinny Scope Mount Rail #ad
Ulightfire 25.4/30mm in Diameter Mount Ring with Extension Picatinny Scope Mount Rail
Ulightfire 25.4/30mm in Diameter Mount Ring with Extension Picatinny Scope Mount Rail #ad - It’s possible to install it on a 20 mm dovetail rail with the wrench attached. Material aluminum alloy size 45 x 41 x 41 mm weight approx 30 g. Made with lightweight aluminum precisely , light weight and durability is guaranteed. 20 mm width rail suitable for attaching a flashlight, dot site, scope etc to your equipments.

 

EGW Browning AB3 Short Action Picatinny Rail Scope Mount 0 MOA #ad
EGW Browning AB3 Short Action Picatinny Rail Scope Mount 0 MOA
EGW Browning AB3 Short Action Picatinny Rail Scope Mount 0 MOA #ad - The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the usa. Machined from domestic 6061 t6 extruded aluminum finish matte black only mounting hardware hex head screws and wrench provided ab3 short action center spread 3. 276″ height 0. Egw’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike. After machining, the mounts are tumbled, sand blasted, and type ii anodized for long lasting durability. The ab3 (a-bolt 3) mount is available in 0 or 20 moa. Also, in many cases, it will not obstruct usage of factory iron sights. This mount comes standard with a bevel on both sides making it ambidextrous. Please see our faq page for further information on moa. This mount is a picatinny-style base and compatible with picatinny or weaver scope rings. The center spread is the distance between the two middle holes, center to center, on your receiver. Add egw’s practical or hd scope rings to make it a complete overhaul we machine these in our shop using one of our usa-made fadal machining centers. Installation egw recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately). Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. 394″ this mount fits the short action ab3 only. 25″ overall length 6. Custom silver anodizing is available upon request, for an additional charge of $15 (a lead time of approximately 3 months is also associated with this custom anodizing. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Please call us if you are interested in placing a custom order).

 

Savage EdgeAxisAxis 2 Picatinny Rail Scope Mount 20 MOA #ad
Savage Edge/Axis/Axis 2 Picatinny Rail Scope Mount 20 MOA
Savage Edge/Axis/Axis 2 Picatinny Rail Scope Mount 20 MOA #ad - Rock solid. Savage edge/axis/axis 2 picatinny rail scope mount 20 moa.

 

EGW TC Contender Picatinny Rail Scope Mount 20 MOA #ad
EGW T/C Contender Picatinny Rail Scope Mount, 20 MOA
EGW T/C Contender Picatinny Rail Scope Mount, 20 MOA #ad - 4″” high. Also, in many cases, it will not obstruct usage of factory iron sights. Finish matte black.  . Center spread. 838″. Mounting hardware hex head screws and wrench provided. Installation egw recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately). Please call us if you are interested in placing a custom order). After machining, the mounts are tumbled, sand blasted, and type ii anodized for long lasting durability. The center spread is the distance between the two middle holes, center to center, on your receiver. This mount is a picatinny-style base and compatible with picatinny or weaver scope rings. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Custom silver anodizing is available upon request, for an additional charge of $15 (a lead time of approximately 3 months is also associated with this custom anodizing. 488″. Egw’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike. Overall length 5. The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the usa. Machined from domestic 6061 t6 extruded aluminum. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories.  . This base sits at approximately 0. Our tc contender mount is made specific to the gun, and will fit both rifles and pistols. Add egw’s practical or hd scope rings to make it a complete overhaul we machine these in our shop using one of our usa-made fadal machining centers.

 

EGW TC Encore Picatinny Rail Scope Mount 20 MOA #ad
EGW T/C Encore Picatinny Rail Scope Mount, 20 MOA
EGW T/C Encore Picatinny Rail Scope Mount, 20 MOA #ad - Egw scope base t/c encore picatinny rail 20moastyle 1-pc mil-std 1913 picatinny finish black-matte material aluminum alloy type of rings needed mil-std 1913 picatinny rings included n other features made in usa manufacturer evolution gun worksmodel no 46902.

 

EGW Savage Rascal Picatinny Rail Scope Mount #ad
EGW Savage Rascal Picatinny Rail Scope Mount
EGW Savage Rascal Picatinny Rail Scope Mount #ad - The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. 094″. Egw’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike. Overall length 5. Finish matte black. Installation egw recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately). This rail is only for right hand guns. This one piece mount was specifically developed for the savage rascal. This mount is a picatinny-style base and compatible with picatinny or weaver scope rings. Center spread 1. Machined from domestic 6061 t6 extruded aluminum. We also offer this in a left hand bevel for the left hand gun, part #41961. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. 884″. Mounting hardware hex head screws and wrench provided.

 

Remington 710770 Picatinny Rail Scope Mount #ad
Remington 710/770 Picatinny Rail Scope Mount
Remington 710/770 Picatinny Rail Scope Mount #ad - This mount is available in 0 moa only. Egw’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike. This scope mount fits the remington 710/770. Installation egw recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately). Hardware hex head screws and wrench provided. This mount is a picatinny-style base and compatible with picatinny or weaver scope rings. Custom silver anodizing is available upon request, at an additional charge of $15 (there is also a 3 month lead time associated with silver anodizing. Also, in many cases, it will not obstruct usage of factory iron sights. Center spread 2. Overall length 6. Available in matte black. Please give us a call if you’d like to place a custom order). The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. 670″.  . Add egw’s practical or hd scope rings to make it a complete overhaul . Machined from domestic 6061 t6 extruded aluminum. 460″. Finish matte black .  .  .

 

Evolution Gun Works Savage Round Back Short Action Picatinny Rail Scope Mount 0 MOA Ambidextrous 41000 #ad
Evolution Gun Works Savage Round Back Short Action Picatinny Rail Scope Mount 0 MOA Ambidextrous (41000)
Evolution Gun Works Savage Round Back Short Action Picatinny Rail Scope Mount 0 MOA Ambidextrous (41000) #ad - Egw scope base savage round back sa picatinny railstyle 1-pc mil-std 1913 picatinny finish black-matte material aluminum alloy type of rings needed mil-std 1913 picatinny rings included n other features made in usa, this savage base will work with any short action round back savage with an ejection port manufacturer evolution gun worksmodel no 41000.

 

Evolution Gun Works Hd Browning X-Bolt Long Action Picatinny Rail Scope Mount 0 #ad
Evolution Gun Works Hd Browning X-Bolt Long Action Picatinny Rail Scope Mount 0
Evolution Gun Works Hd Browning X-Bolt Long Action Picatinny Rail Scope Mount 0 #ad - Designed to fit any 20mm weaver/picatinny base see-thur design. Golden eye high quality 1/2″ riser scope mount rail ,high quality heavy duty best quality , aluminium alloy constructed heavy duty rail. Height3/4″ inch 4 slot riser mount. Browning a-bolt long action picatinny rail scope mount 20 moa. Hd browning x-bolt picatinny rail scope mount long action 0 moa.

 

EGW Remington 783 Short Action Picatinny Rail Scope Mount #ad
EGW Remington 783 Short Action Picatinny Rail Scope Mount
EGW Remington 783 Short Action Picatinny Rail Scope Mount #ad - After machining the mounts are tumbled and sand blasted. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. 485″the center spread is the distance between the two middle holes, center to center, on your receiver. Add egw’s hd scope rings to make it a complete package from manufacturing to packaging, egw’s products are made with pride in the usa. 35″ high. The aluminum mounts are type iii hard coat anodized for long lasting durability. The steel rails are mil spec parkerized for a durable rust resistant finish. Dave. All products are made in the usa by americans. Installation egw recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately). The cross slots are also machined the full width of the mount and gauged to mil-std 1913 specs maintaining tolerances of +/-. 002″.  Compatible with picatinny or weaver scope rings. Thank you for your business. It is my goal to make my customers 100% satisfied with their purchase. The sporting jack outfitters is veteran owned should you have any questions or issues with your new grips please contact me. [Link removed]descriptionmachined from solid 7075 t6 aircraft grade aluminumfinish matte black onlycompatible with picatinny or weaver scope rings.  Mounting hardware socket head torx screws and wrench providedcenter spread 4. These bases sit at approximately 0.

 

Evolution Gun Works Winchester XPR Short Action Picatinny Rail Scope Mount 0 MOA Ambidextrous #ad
Evolution Gun Works Winchester XPR Short Action Picatinny Rail Scope Mount 0 MOA Ambidextrous
Evolution Gun Works Winchester XPR Short Action Picatinny Rail Scope Mount 0 MOA Ambidextrous #ad - Please give us a call if you’d like to place a custom order). Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories.   Egw’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike.   installation egw recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately). Custom silver anodizing is available upon request, at an additional charge of $15 (there is also a 3 month lead time associated with silver anodizing.   This mount is a picatinny-style base and compatible with picatinny or weaver scope rings.   Also, in many cases, it will not obstruct usage of factory iron sights.   The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average.   Add egw’s practical or hd scope rings to make it a complete overhaul  available in matte black.

 

Evolution Gun Works HD Savage Round Back Short Action Picatinny Rail Scope Mount 20 MOA NEW #ad
Evolution Gun Works HD Savage Round Back Short Action Picatinny Rail Scope Mount 20 MOA NEW
Evolution Gun Works HD Savage Round Back Short Action Picatinny Rail Scope Mount 20 MOA NEW #ad - Installation egw recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately). Machined from solid 7075 t6 aircraft grade aluminum. The center spread is the distance between the two middle holes, center to center, on your receiver. The steel rails are mil spec parkerized for a durable rust resistant finish. 002″. Add egw’s hd scope rings to make it a complete package from manufacturing to packaging, egw’s products are made with pride in the usa. 93″. These scope mounts are now ambidextrous. Compatible with picatinny or weaver scope rings. The aluminum mounts are type iii hard coat anodized for long lasting durability. Center spread 3. The cross slots are also machined the full width of the mount and gauged to mil-std 1913 specs maintaining tolerances of +/-.  Mounting hardware socket head torx screws and wrench provided. 670″. Finish matte black only. These bases sit at approximately 0. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories.  Compatible with picatinny or weaver scope rings. 35 high. Overall length of mount 6. After machining the mounts are tumbled and sand blasted.

 

EGW HD Tikka T3 Picatinny Rail Scope Mount 20 MOA NEW #ad
EGW HD Tikka T3 Picatinny Rail Scope Mount 20 MOA NEW
EGW HD Tikka T3 Picatinny Rail Scope Mount 20 MOA NEW #ad - Installation egw recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).  Mounting hardware socket head torx screws and wrench provided. Compatible with picatinny or weaver scope rings.  . Machined from solid 7075 t6 aircraft grade aluminum. This mount is made specifically for the tikka t3. Check out the tikka faq page. Center spread 3. Add egw’s hd scope rings to make it a complete package from manufacturing to packaging, egw’s products are made with pride in the usa. Overall length of mount 7. 002″. Finish matte black only. After machining the mounts are tumbled and sand blasted. The steel rails are mil spec parkerized for a durable rust resistant finish. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. 35 high. 458″. The center spread is the distance between the two middle holes, center to center, on your receiver. The cross slots are also machined the full width of the mount and gauged to mil-std 1913 specs maintaining tolerances of +/-. The aluminum mounts are type iii hard coat anodized for long lasting durability.  Compatible with picatinny or weaver scope rings. Metric screws are only available with hex heads. These bases sit at approximately 0. 245″.

 

Evolution Gun Works Savage Round Back Long Action Picatinny Rail Scope Mount 20 #ad
Evolution Gun Works Savage Round Back Long Action Picatinny Rail Scope Mount 20
Evolution Gun Works Savage Round Back Long Action Picatinny Rail Scope Mount 20 #ad - Egw scope base savage round back la picatinny rail 20moastyle 1-pc mil-std 1913 picatinny finish black-matte material aluminum alloy type of rings needed mil-std 1913 picatinny rings included n other features made in usa, this savage base will work with any long action round back savage with an ejection port other features2 will not fit the 212 manufacturer evolution gun worksmodel no 41102.

 

Savage Round Back Long Action Picatinny Rail Scope Mount 0 MOA #ad
Savage Round Back Long Action Picatinny Rail Scope Mount 0 MOA
Savage Round Back Long Action Picatinny Rail Scope Mount 0 MOA #ad - Egw scope base savage round back la picatinny railstyle 1-pc mil-std 1913 picatinny finish black-matte material aluminum alloy type of rings needed mil-std 1913 picatinny rings included n other features made in usa, this savage base will work with any long action round back savage with an ejection port other features2 will not fit the 212 manufacturer evolution gun worksmodel no 41100.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.