Best 16 30mm Mounts

 

Primary Arms Deluxe Extended AR15 Scope Mount 30mm Black
Primary Arms Deluxe Extended AR15 Scope Mount, 30mm, Black
Primary Arms Deluxe Extended AR15 Scope Mount, 30mm, Black - This aluminum scope mount is ideal for m4 and ar15 flat-top platforms. It fits any scope with 30 mm tube. It allows for ntch (nose to charging handle) shooting position. Supporting every precision scope, there is a primary arms scope mount.

 

Pinty 15-4x30mm Tactical Chevron Reticle Riflescope Red&Blue&Green Illuminated with 30mm Mount
Pinty 1.5-4x30mm Tactical Chevron Reticle Riflescope Red&Blue&Green Illuminated with 30mm Mount
Pinty 1.5-4x30mm Tactical Chevron Reticle Riflescope Red&Blue&Green Illuminated with 30mm Mount - Green fused multi-coated lens makes the best use of available light and the tri-illuminated, (red, green, blue) laser etched reticles with an adjustable rheostat for brightness control as well as windage and elevation adjustment allow you to customize your shot for any environment. Milled from one solid piece of aircraft grade aluminum to withstand repetitive recoil, this scope is also fitted with a fog proof, nitrogen charged lens with weather resistant seals so you can be sure that it will perform superbly each time. Integrated tri-rails fit most weaver and picatinny rails. A 4, 5 inch eye relief provides safety from heavy recoil and enables fast target acquisition.

 

KingFurt 1 inch 30mm QD Quick Release Cantilever Weaver Forward Reach Dual Ring Rifle Scope Optics Mount
KingFurt 1 inch /30mm QD Quick Release Cantilever Weaver Forward Reach Dual Ring Rifle Scope Optics Mount
KingFurt 1 inch /30mm QD Quick Release Cantilever Weaver Forward Reach Dual Ring Rifle Scope Optics Mount - Durable aircraft grade aluminum construction. Scope mount for mounting standard 30mm or 1 inch tube rifle scopes mounts to any flat top picatinny or weaver rail equipped rifle. Scope mount with qick detach locks for picatinny weaver rail. Built in weaver style rails, very handy fitting flashlights and lasers etc. Fits 20mm picatinny weaver rails.

 

15-4x30mm Tactical Chevron Reticle Riflescope Red&Blue&Green Illuminated with 30mm Mount
1.5-4x30mm Tactical Chevron Reticle Riflescope Red&Blue&Green Illuminated with 30mm Mount
1.5-4x30mm Tactical Chevron Reticle Riflescope Red&Blue&Green Illuminated with 30mm Mount - Green fused multi-coated lens makes the best use of available light and the tri-illuminated, (red, green, blue) laser etched reticles with an adjustable rheostat for brightness control as well as windage and elevation adjustment allow you to customize your shot for any environment. 5x, 25′ at 4x windage/elevation adjustment 1/2″ moa weight 21oz length 10 3/4″ reticle color red, green, blue package includes 1x rifle scope 2x cr2032 battery (one pre-installed) 2x lens cap 1x cleaning cloth 1x hex wrench. A 4, 5 inch eye relief provides safety from heavy recoil and enables fast target acquisition. Integrated tri-rails fit most weaver and picatinny rails. 5-4x30mm tactical chevron reticle riflescope red&blue&green illuminated with 30mm mount  milled from one solid piece of aircraft grade aluminum to withstand repetitive recoil, this scope is also fitted with a fog proof, nitrogen charged lens with weather resistant seals so you can be sure that it will perform superbly each time. Specifications eye relief 4-5″ power one cr2032 battery field of view 85′ @100 yards 85′ at 1. Feature 1.

 

15-4x30mm Tactical Chevron Reticle Riflescope Red&Blue&Green Illuminated with 30mm Mount Etched Glass Reticle
1.5-4x30mm Tactical Chevron Reticle Riflescope Red&Blue&Green Illuminated with 30mm Mount Etched Glass Reticle
1.5-4x30mm Tactical Chevron Reticle Riflescope Red&Blue&Green Illuminated with 30mm Mount Etched Glass Reticle - A 4, 5 inch eye relief provides safety from heavy recoil and enables fast target acquisition. 5x, 25′ at 4x windage/elevation adjustment 1/2″ moa weight 21oz length 10 3/4″ reticle color red, green, blue package includes 1x rifle scope 2x cr2032 battery (one pre-installed) 2x lens cap 1x cleaning cloth 1x hex wrench. Feature red/green/blue tri-color illuminated etched glass reticle  milled from one solid piece of aircraft grade aluminum to withstand repetitive recoil, this scope is also fitted with a fog proof, nitrogen charged lens with weather resistant seals so you can be sure that it will perform superbly each time. Green fused multi-coated lens makes the best use of available light and the tri-illuminated, (red, green, blue) laser etched reticles with an adjustable rheostat for brightness control as well as windage and elevation adjustment allow you to customize your shot for any environment. Specifications eye relief 4-5″ power one cr2032 battery field of view 85′ @100 yards 85′ at 1. Integrated tri-rails fit most weaver and picatinny rails.

 

TAC Vector Optics Tactical 30mm Scope Extreme Low Weaver Mount Ring Heavy Duty High End Color Black
TAC Vector Optics Tactical 30mm Scope Extreme Low Weaver Mount Ring Heavy Duty High End Color Black
TAC Vector Optics Tactical 30mm Scope Extreme Low Weaver Mount Ring Heavy Duty High End Color Black - 6 ounce) fit on 21mm picatinny rail high quality aluminum alloy in durable black matte finish six bolts ring style in heavy duty shock proof can be used on real fire caliber. 8 inch from base bottom to ring center) weight (net) 130g (4. Vector optics 30mm tactical extreme low riflescope picatinny mount ring (sctm-19) one pair auction, full metal, extreme low, six bolts, heavy duty model sctm-19 diameter 30mm length 25. 4mm (1. 0 inch) height 21mm (0.

 

UTG 30mm Flip-to-Side PicatinnyWeaver QD Ring Mount
UTG 30mm Flip-to-Side, Picatinny/Weaver QD Ring Mount
UTG 30mm Flip-to-Side, Picatinny/Weaver QD Ring Mount - Picatinny/weaver compatible mounting base with patented quick-detach lever lock for rapid and secure installation. Precision machined from aircraft-grade aluminum alloy with anodized black matte finish. Fits magnifiers or other accessories with 30mm tube diameter, 40mm center height ensures compatibility with many popular dot sights. Complete with 2 inserts to use with a wide range of flashlights or other accessories with 30mm, 27mm or 1″ diameter. Patented, innovative flip-to-side design allows target acquisition at varying distances and flexible position of accessory.

 

Taousa 70224 Tactical 30mm1 254mm Scope Ring Mount Picatinny Weaver Dual Ring Quick Release Cantilever
Taousa 70224 Tactical 30mm/1″ 25.4mm Scope Ring Mount Picatinny Weaver Dual Ring Quick Release Cantilever
Taousa 70224 Tactical 30mm/1″ 25.4mm Scope Ring Mount Picatinny Weaver Dual Ring Quick Release Cantilever - Black rifle matte finish, offset design for better eye relief position. Taousa is a registered trademark owned by taousa llc unauthorized sellers are not allowed to list their products under this listing. Fit for picatinny rail scope whose width is 20mm. Includes 1x quick release rifle scope mount, 2 pairs of rings, 2x l wrench key for adjusting the center pin. Made from aircraft grade aluminum alloy ring diameter 30mm(without insert)/1 inch(with insert).

 

Weaver Thumbnut Spr 30Mm Mount
Weaver Thumbnut Spr 30Mm Mount
Weaver Thumbnut Spr 30Mm Mount - Another quality bushnell product. Thumb-nut bolts for turning leverage. Rugged cross-lock base design for ultimate gripping strength. Made of the highest quality materials. Hunting scopes mounts. Four-hole ring design for added gripping power. Sleek design for low-profile mounting. Optimal height and forward cantilever for ar platform rifles.

 

M1Surplus Classic Rifle Optics Kit for Mosin Nagant - Includes Scout Style Scope Mount  Low Profile 30mm Red Dot Sight - This item fits 1891 189130 9130 M44 M38 Mosin Rifles and Carbines
M1Surplus Classic Rifle Optics Kit for Mosin Nagant – Includes Scout Style Scope Mount + Low Profile 30mm Red Dot Sight – This item fits 1891 1891/30 91/30 M44 M38 Mosin Rifles and Carbines
M1Surplus Classic Rifle Optics Kit for Mosin Nagant – Includes Scout Style Scope Mount + Low Profile 30mm Red Dot Sight – This item fits 1891 1891/30 91/30 M44 M38 Mosin Rifles and Carbines - Requires removal of rifles rear iron sight. Battery and polishing cloth included. All items are brand new and have a manufacture warranty against defects. Because of this, there is no consideration of eye relief distance so the scope can be mounted practically anywhere a weaver/picatinny type rail is available. Adjustable for windage and elevation. The mount will fit accept most rifle/pistol scopes, red dot scopes and other aiming devices. M1surplus classic rifle optics kit for mosin nagant, ( mount features ), mosin nagant scope mount and 1×30 tactical red dot scope with flip up lens covers 91/30 m44 m38, scope mount features, material aluminum, color matte black, the scope mount replaces the rear sight leaf on your nagant rifle. Thread locking compound is not included, all included items are brand new. This red dot scope is intended for fast target acquisition and does not have any magnification. Due to the mosin nagants heavy recoil, thread locking compound such as loc-tite should be used on all screws and bolts. Tested to fit on the following rifles mosin nagant 91/30, m44, m38 type 53 & russian nagants, ( scope features ), tube diameter 30mm, mount built in weaver style base, tactical protective flip-up lens covers, color matte black, ruby lens coating improves clarity and reduces glare, red dot reticle, 5 moa dot size, made to withstand the heavy recoil. Comes with all the necessary mounting hardware.

 

QD Scope Ring Mount 30mm or 1 inch with Top Rail Extended Offset Picatinny Mount Black
QD Scope Ring Mount 30mm or 1 inch with Top Rail Extended Offset Picatinny Mount (Black)
QD Scope Ring Mount 30mm or 1 inch with Top Rail Extended Offset Picatinny Mount (Black) - Center split rings maintain reticle alignment during installation. Rugged, lightweight, anti-snag aluminum design, this mount is strongly built and perfectly smooth in its construction. Ring diameter 1inch, 30mm / rail mount 20mm rail / weight 230g. Open the clamp and push it in while holding the opposite side a small nut will stick out you can turn the nut to tighten the clamp. Features two innovative spring-loaded clamps the clamps place the majority of the clamping force upon the rail.

 

Visionking Rifle Scope Rings 254 30mm Mount Ring 6061 for 223 308 50 High 11 mm Dovetail
Visionking Rifle Scope Rings 25.4 & 30mm Mount Ring 6061 for .223 .308 .50 High 11 mm Dovetail
Visionking Rifle Scope Rings 25.4 & 30mm Mount Ring 6061 for .223 .308 .50 High 11 mm Dovetail - 4mm or 30mm tube. 50 cal. Fits for 11mm rails. Specifications body material high quality 6061 aluminum weight(g) 230g(before packing) ring diameter 25. With and six bolts it can load heavy duty up to. Descriptions this rifle scope mount fits for rifle scope with 25. 4mm/30mm.

 

Sightmark 30mm Fixed Cantilever Mount
Sightmark 30mm Fixed Cantilever Mount
Sightmark 30mm Fixed Cantilever Mount - The 1 in. “”The sight mark 30mm fixed cantilever mount is a fixed mount design that fits 30mm riflescope tubes. The 30mm mount is constructed from a durable 6061-t6 aluminum with a matte black , non-reflective finish. Forward offset allows for proper scope.

 

Nikon 840 m-Series 30mm 20 MOA Black Xr Mount
Nikon 840 m-Series (30mm) (20 MOA), Black, Xr Mount
Nikon 840 m-Series (30mm) (20 MOA), Black, Xr Mount - Features a rock solid weaver/picatinny mounting base with integral 1 inch rings shifted forward to extend your eye relief. The built in 20 moa one piece design maximizes your optics elevation for extremely long range shooting. That allows you the versatility to mount any weaver style rings to a rock solid base. The lightest weight aluminum construction is ready to mount right to your ar’s flattop rail.

 

ADM Recon 30mm mount
ADM Recon 30mm mount
ADM Recon 30mm mount - The ad-recon mount is made for putting high power glass onto a flattop style ar-15. The ad-recon works with scopes with objective housings as large as 56mm. The cantilever throws the scope out front, allowing you to get the right eye relief. It is precision machined from 6061 t6 aluminum and finished in hard coat t3 mil-spec anodize. For 30mm rings. It features the patented qd auto lock lever system to accommodate both in spec and out of spec rail systems.

 

Sightmark Flip-to-Side 30mm Mount
Sightmark Flip-to-Side 30mm Mount
Sightmark Flip-to-Side 30mm Mount - Made of tough aluminum. Backed by sightmark’s limited lifetime warranty. Rail mount sticks the may have it too tight. Sightmark 30 mm slide, to, side ring. Flip it open and rotate it clockwise or counter clockwise. Order now sightmark 30 mm slide-to-side ring, matte black the qd mount tension is adjustable. Quick-detach lever. The tension on the slide to side is also adjustable by loosening or tightening the set screws on the front and back of the mount. Or use gun oil and apply it to the moving parts of the qd mount. May have been set too tight at the factory. Fits 30 mm magnifiers the slide-to-side motion of this unit was created so you can use your 30 mm magnifier for long-distance shots and quickly move it to the side to use the 1x magnification of a reflex sight.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.