25 Best Windlasses

 

Lewmar Pro Sport 550 Windlass Gypsy Only 14 G4 Chain 12 Line
Lewmar Pro Sport 550 Windlass Gypsy Only 1/4″ G4 Chain 1/2″ Line
Lewmar Pro Sport 550 Windlass Gypsy Only 1/4″ G4 Chain 1/2″ Line - Minimal parts for enhanced reliability. The v700 now comes with a gypsy able to accept both 6mm and 7mm (1/4) inch chains. Fits calibrated chains 6mm din766, 1/4 g4 or bbb, 7mm din766. 100% 316 stainless steel deck unit. Late configure boat / chain on boatyard assembly line features.

 

Lewmar CRW 400 Captive Reel Windlass Black
Lewmar CRW 400 Captive Reel Windlass, Black
Lewmar CRW 400 Captive Reel Windlass, Black - ) Max case material abs (uv stabilized) all stainless steel hardware and polymer bearings integrated switch/circuit breaker auto-stop device keeps a safe number of wraps on the drum at max deployment dimensions 175 mm h x 300 mm w x 365 mm l (7″ x 12″ x 14. 3″). Load) anchor weight capacity of 16 kg (40 lbs. 5 m (25′) rode type rope rode size 35 m (115′) of 6 mm (1/4″) rope (included) speed up/down 25 m/min (82’/min) no load 400 watt 12 volt dc electric motor with 601 reduction ratio gearbox draw 15 amps at 12 volts dc (20 kg / 40 lb. Style horizontal 316 stainless steel chassis level-wind device prevents rope bunching maximum pull 275 kg (605 lb. ) safe working load 150 lb. Boat length up to 7.

 

High Tech TU-1 Windlass Tip-Up TU-1 500 Foot Spool Black with Drag
High Tech TU-1 Windlass Tip-Up TU-1 500 Foot Spool Black with Drag
High Tech TU-1 Windlass Tip-Up TU-1 500 Foot Spool Black with Drag - New drag feature on spool for different tension settings. Ht tu-1 windless tip-up. Made of solid, high impact abs plastic. Ends on frame for quick line pick-up. A slight action of the breeze causes the windlass to jig the line. 500 foot spool capacity, 13 inch base length and 2 inch diameter spool.

 

14 x 6 Hot Dipped Galvanzied ISO G4 Windlass Anchor Chain
1/4″ x 6′ Hot Dipped Galvanzied ISO G4 Windlass Anchor Chain
1/4″ x 6′ Hot Dipped Galvanzied ISO G4 Windlass Anchor Chain - 1/4″ x 6′ iso g4 high tensile hot dipped galvanized windlass anchor chain is made of high tensile strength alloy carbon steel that provides a greater strength to weight ration than proof coil chain, iso short link which makes it more flexible and ideality suited as windlass chain, each link is proof tested and calibrated, and g4 stamped on links. Any length of this chain is available in our store.

 

Lewmar Profish 1000 Free Fall Windlass 916LINE 516G4
Lewmar Profish 1000 Free Fall Windlass 9/16″LINE 5/16″G4
Lewmar Profish 1000 Free Fall Windlass 9/16″LINE 5/16″G4 - Speed down/min 131′. Boat length to 45′. Maximum pull 1650 lbs (750 kg). Speed up/min 40′ (175lb). Rode/chain type 5/16″ ht g4 chain, 9/16″ rope.

 

Windlass Covered Foot Switch Wht Down Covered Foot Switch
Windlass Covered Foot Switch Wht Down Covered Foot Switch
Windlass Covered Foot Switch Wht Down Covered Foot Switch - Convenient pre-spliced rope chain combination pack. Maxwell hrc10 horizontal rope chain windlass, 12v capstan 3/8″ chain, 5/8″ rope (41655). Marking tape included in package. Pre-tested through windlass gypsies.

 

Five Oceans S900 Horizontal Windlass 900W - 516 HT-G4 chain – 916” rope – BC 3442
Five Oceans S900 Horizontal Windlass 900W – 5/16″ HT-G4 chain – 9/16” rope – BC 3442
Five Oceans S900 Horizontal Windlass 900W – 5/16″ HT-G4 chain – 9/16” rope – BC 3442 - It includes an impact-resistant motor cover, solenoid and reed switch magnet fitted as standard for chain counter. Package includes (wiring and fasteners are not included), solenoid, circuit breaker, up/down switch, foot switches, manual specification boat length to 35′ rode type rope/chain rode size 5/16″ ht chain, 9/16″ rope speed up/min. For powerboats and sailboats. These are adequate for most installations. The standard (1/4″) threaded mounting studs supplied suit deck and packing thickness of up to 50 mm (2″). Working load (kgs/ib) 250/550 max. This five oceans s900 horizontal windlass has a stylish look, 100% stainless-steel design sit elegantly on the deck. Decks that are thin, or of foam or balsa laminate construction, will require reinforcement in order to spread the loads that will be applied to the deck while the windlass is in use. Installation details if the deck is not flat, a suitable mounting pad may be required to take up camber or sheer. 35′ (115lb. Not to mention, it’s fitted with a heavy-duty control arm and stripper. Power pull (kgs/ib) 750/1650 type horizontal product number 3442. ) Speed down/min 82′ maximum pull 1650 lbs (750 kg) motor 900w voltage 12 volts current draw(a) 35 amps max. Noteworthy is the “failsafe” gypsy lock that prevents accidental deployment while underway.

 

Maxwell RC8 12V Windlass - 1000W 516 Chain to 58 Rope
Maxwell RC8 12V Windlass – 1000W 5/16 Chain to 5/8 Rope
Maxwell RC8 12V Windlass – 1000W 5/16 Chain to 5/8 Rope - 75 fpm retrieval speed weighs 23 pounds 3-year warranty. Stainless-steel rope and fasteners and watertight seals. Makes it easy to anchor boat in precise location (no drifting). Maxwell rc8 12v windlass 1000w 5/16 chain to 5/8 rope. Drops up to 4 times faster (300 fpm) than power-down anchors.

 

WINDLASSES ANCHOR RODE- 12 8 PLAIT NYLON SPLICED TO 14 GALVANIZED CHAIN 150
WINDLASSES ANCHOR RODE- 1/2″ 8 PLAIT NYLON SPLICED TO 1/4″ GALVANIZED CHAIN (150)
WINDLASSES ANCHOR RODE- 1/2″ 8 PLAIT NYLON SPLICED TO 1/4″ GALVANIZED CHAIN (150) - Premium nylon rope back-spliced to calibrated chainabrasion resistantshock absorbentcompatible with windlasseslewmar pro-sport 550lewmar pro-fish 700lewmar pro-series 700maxwell hrc6. Windlass anchor rode, 1/2″ 8 plait nylon rope spliced to 15′, 1/4″ g4 high test hot-dipped galvanized chain. Third, eight plait rope is able to absorb higher shock loads than three strand rope. First, eight plait rodes have a looser, bi-directional woven lay, allowing it to drape over itself, reducing air voids found between the coiled, denser line found in three strand rodes. Eight plait anchor rodes have a few distinct advantages over three strand rodes. The more air in the locker, the less line capacity you’re able to carry onboard. Second, since the line has no bias clockwise or counter clockwise, the rope will not hockle or kink, allowing the windlass to manage the rope better.

 

Marine Anchor Windlass up Down 12v Rocker Control Switch Panel – Five Oceans
Marine Anchor Windlass up & Down 12v Rocker Control Switch Panel – Five Oceans
Marine Anchor Windlass up & Down 12v Rocker Control Switch Panel – Five Oceans - Does not handle windlass current draw, but easily handles solenoid current. Five oceans compact rocker switch allows up/down operation from any remote station. Amperage 5 amps product number 3739. Specification type windlass control style up/down rocker switch dimension 2-1/8″w x 3-1/8″h.

 

WINDLASSES ANCHOR RODE- 58 3 STRAND NYLON SPLICED TO 516 GALVANIZED CHAIN 150
WINDLASSES ANCHOR RODE- 5/8″ 3 STRAND NYLON SPLICED TO 5/16″ GALVANIZED CHAIN (150)
WINDLASSES ANCHOR RODE- 5/8″ 3 STRAND NYLON SPLICED TO 5/16″ GALVANIZED CHAIN (150) - Windlass anchor rode, 5/8″ 3 strand nylon rope spliced to 5/16″ g4 high test hot-dipped galvanized chainthree strand windlass anchor rodes are designed and constructed differently than throw over anchor rodes. The combination of premium nylon rope and g4 high-test chain is suitable for all major windlass manufacturers. The rope is coated and heat stabilized for minimum water absorption and fiber-to-fiber abrasion. Please check your windlass manufacturer’s specifications to ensure a proper match. Designed specifically for windlassespremium nylon rope spliced to calibrated chainabrasion resistantshock absorbentcompatible with windlasseslewmar pro-series 1000lewmar pro fish 1000. Twisted nylon rope maximizes the rode’s shock absorption while reducing wear and tear on your windlass, anchor roller and ground tackle. High-quality nylon fibers reduce hardening of the rope, nearly eliminating all knots and hockles. Windlass rode’s are assembled using 3 strand premium nylon rope spliced to g4 high-test calibrated chain. The g4 hot dipped galvanized chain is calibrated to fit windlasses with iso short link chainwheels.

 

Lewmar Pro 1000H Windlass
Lewmar Pro 1000H Windlass
Lewmar Pro 1000H Windlass - Pre-tested through windlass gypsies. Maxwell hrc10 horizontal rope chain windlass, 12v capstan 3/8″ chain, 5/8″ rope (41655). Marking tape included in package. Convenient pre-spliced rope chain combination pack.

 

Windlass Updown Switch  Five Oceans
Windlass Up/down Switch . Five Oceans
Windlass Up/down Switch . Five Oceans - Five oceans´ switchgear is designed to ensure safe operation and long service life of your equipment. His five oceans´rocker switch panel allows up/down operation from any remote station, and it has stainless steel front. To operate your windlass safely in all weather conditions you need top quality switch gear that can stand up to the elements. It does not handle windlass current draw, but easily handles solenoid current.

 

14 x 30 Hot Dipped Galvanzied ISO G4 Windlass Anchor Chain
1/4″ x 30′ Hot Dipped Galvanzied ISO G4 Windlass Anchor Chain
1/4″ x 30′ Hot Dipped Galvanzied ISO G4 Windlass Anchor Chain - Any length of this chain is available in our store. 1/4″ x 30′ iso g4 high tensile hot dipped galvanized windlass anchor chain is made of high tensile strength alloy carbon steel that provides a greater strength to weight ration than proof coil chain, iso short link which makes it more flexible and ideality suited as windlass chain, each link is proof tested and calibrated, and g4 stamped on links.

 

Norestar 200 feet by 12 inch Braided Nylon Boat Anchor Rope and 15 feet by 14 inch Marine HT G4 Chain for Boat Windlass Prespliced
Norestar 200 feet by 1/2 inch Braided Nylon Boat Anchor Rope and 15 feet by 1/4 inch Marine HT G4 Chain for Boat Windlass, Prespliced
Norestar 200 feet by 1/2 inch Braided Nylon Boat Anchor Rope and 15 feet by 1/4 inch Marine HT G4 Chain for Boat Windlass, Prespliced - To determine your required chain and rope size, refer to your windlass manual. Note this rode is not suitable for lewmar 700 series windlasses. Each windlass is equipped with a gypsy that fits a particular size of rope and chain. New braided rope should be soaked in water (salt or fresh ok) to condition the rope so it can be used in the windlass initially. Once wet and used, braided rope generally performs better than 3-strand. As well, each windlass will fit bbb chain, ht chain, or both. Ht chain may also be referred to as g4 chain, g43, acco ht chain, or high test chain, all of which are interchangeable. Ideal for use with windlasses, this double braided nylon rope is professionally spliced to a generous amount of ht g4 chain. By purchasing a pre-spliced rope and chain package, you save the extra expense, time, and effort of custom splicing the rope and chain separately. Remember to always confirm rope and chain size against your windlass manual as gypsies vary. When the rope is used dry and new, slippage or sticking in the gypsy can occur. Specifications wbrht150-12 rope size, 1/2″ x 150′ chain size, 1/4″ x 15′ rope type, 24 strand double braided nylon chain type, galvanized ht g4 chain wbrht200-12 rope size, 1/2″ x 200′ chain size, 1/4″ x 15′ rope type, 24 strand double braided nylon chain type, galvanized ht g4 chain.

 

WINDLASS ANCHOR RODE- 12 3 STRAND NYLON SPLICED TO 15 - 14 GALVANIZED CHAIN 150
WINDLASS ANCHOR RODE- 1/2″ 3 STRAND NYLON SPLICED TO 15′ – 1/4″ GALVANIZED CHAIN (150)
WINDLASS ANCHOR RODE- 1/2″ 3 STRAND NYLON SPLICED TO 15′ – 1/4″ GALVANIZED CHAIN (150) - Windlass rodes are assembled using 3 strand premium nylon rope spliced to g4 high-test calibrated chain. Please check your windlass manufacturers specifications to ensure a proper match. The g4 hot dipped galvanized chain is calibrated to fit windlasses with iso short link chainwheels. The combination of premium nylon rope and g4 high-test chain is suitable for all major windlass manufacturers. Twisted nylon rope maximizes the rode’s shock absorption while reducing wear and tear on your windlass, anchor roller and ground tackle. The rope is coated and heat stabilized for minimum water absorption and fiber-to-fiber abrasion. Three strand windlass anchor rodes are designed and constructed differently than throw over anchor rodes. High-quality nylon fibers reduce hardening of the rope, nearly eliminating all knots and hockles.

 

Lewmar PRO-FISH 700 6 mm-7 mm-14 Pro-Fish Windlass
Lewmar PRO-FISH 700 6 mm-7 mm-1/4″ Pro-Fish Windlass
Lewmar PRO-FISH 700 6 mm-7 mm-1/4″ Pro-Fish Windlass - 5-year warranty manual emergency recovery equipped all you need is a common 1/2 socket wrench. Powerful motor providing fast line speed convenient above-deck installation. For boats up to 12m (38ft. Maximum pulling power 320kg (700 lb) for the 700 and 454kg (1,000 lb) for the 1000. Automatic freefall.

 

Lewmar V700 G 12V 67 mm 14 Vertical Windlasses
Lewmar V700 G 12V 6/7 mm 1/4″ Vertical Windlasses
Lewmar V700 G 12V 6/7 mm 1/4″ Vertical Windlasses - It works at the push of a button and has two built-in features that make it unique motor protection and anchor lock. Plus its affordable. With 100% 316 stainless steel housing and a sleek flush-mount design that hides the motor down below, the v700 is one of the most attractive and durable windlasses on the market.

 

Five Oceans C900 Vertical Windlass 900W - 14 Chain 12 Rope – BC 3287
Five Oceans C900 Vertical Windlass 900W – 1/4″ Chain & 1/2″ Rope – BC 3287
Five Oceans C900 Vertical Windlass 900W – 1/4″ Chain & 1/2″ Rope – BC 3287 - Installation details if the deck is not flat, a suitable mounting pad may be required to take up camber or sheer. These are adequate for most installations. Not to mention,it’s fitted with a heavy-duty control arm and stripper. This five oceans c900 vertical windlass has a stylish low-profile, 100% stainless-steel design sit elegantly on the deck. Package includes (wiring and fasteners are not included), solenoid, circuit breaker, up/down switch, foot switches, manual specification boat length to 35′ rode type rope/chain rode size 1/4″ ht chain, 1/2″ rope speed up/min. The standard (1/4″) threaded mounting studs supplied suit deck and packing thickness of up to 50 mm (2″). Decks that are thin, or of foam or balsa laminate construction, will require reinforcement in order to spread the loads that will be applied to the deck while the windlass is in use. ) Speed down/min 82′ maximum pull 1452 lbs (660 kg) motor 900w voltage 12 volts current draw(a) 55 amps max. Noteworthy is the “failsafe” gypsy lock that prevents accidental deployment while underway. 50′ (175lb. Working load (kgs/ib) 220/484 max. It includes an impact-resistant motor cover, solenoid and reed switch magnet fitted as standard for chain counter. Power pull (kgs/ib) 660/1452 type vertical product number 3287. For powerboats and sailboats.

 

Euro Rocker Switch Cover with Text Black with Blue Lens Contura II Fits Carling Cole Hersee Blue seas WINDLASS 2 LENS
Euro Rocker Switch Cover with Text, Black with Blue Lens. Contura II, Fits Carling, Cole Hersee, Blue seas (WINDLASS (2 LENS))
Euro Rocker Switch Cover with Text, Black with Blue Lens. Contura II, Fits Carling, Cole Hersee, Blue seas (WINDLASS (2 LENS)) - These are made with hard plastic & hardy ink to stand up to constant use. This listing is for the cover only, not the switch body. Some of the covers come with 1 or 2 lenses depending on what type of covers, review listed picture to verify. Switch covers can be removed with our removal tool which can found on our website. These covers will fit on most of the rocker switches we carry. Brand new euro rocker carling technologies contura iii switch cover that will fit mostly all carling technologies, blue seas & cole hersee rocker switches. This switch cover will snap right on to your existing switch. This is the most commonly used switch cover for marine applications but can also be used for cars/jeeps/side by sides & rv applications.

 

Maxwell RC6 12V Windlass - 500W f14 Chain to 12 Rope
Maxwell RC6 12V Windlass – 500W f/1/4 Chain to 1/2 Rope
Maxwell RC6 12V Windlass – 500W f/1/4 Chain to 1/2 Rope - The in-line, vertical gearbox and motor means quick and easy installation by either the boat yard or the diy aftermarket customer. The rc6 utilizes 6mm/7mm (1/4″) chain spliced to 12mm (1/2″) three strand or 8-plait rope. Kits includewindlass , an on/off breaker panel, a reversing soleniod, an up/down panel switch and a handle. An inexpensive, high performance and great looking windlass the rc6 is built for durability and years of trouble free use. Providing most of the features of the larger rc8, the rc6 has been designed with the smaller, trailer boat market in mind. The rc6 is available only as a low profile unit (no optional capstan drum). Maximum pull 660lbs.

 

Powerwinch Sport Fishing 450 FreeFall Anchor Windlass
Powerwinch Sport Fishing 450 FreeFall Anchor Windlass
Powerwinch Sport Fishing 450 FreeFall Anchor Windlass - Drops up to 4 times faster (150 fpm) than power-down anchors. Stainless-steel rope and fasteners and watertight seals. Makes it easy to anchor boat in precise location (no drifting). Free-fall anchor system designed for sport fishing boats. 70 fpm retrieval speed weighs 21 pounds 2-year warranty.

 

Norestar 200x12 Braided Nylon Boat Anchor Rope and 15x14 Marine HT G4 Stainless Steel Chain Boat Windlass Prespliced Rode
Norestar 200’x1/2″ Braided Nylon Boat Anchor Rope and 15’x1/4″ Marine HT G4 Stainless Steel Chain, Boat Windlass, Prespliced Rode
Norestar 200’x1/2″ Braided Nylon Boat Anchor Rope and 15’x1/4″ Marine HT G4 Stainless Steel Chain, Boat Windlass, Prespliced Rode - Designed for use with windlasses. Save money, time, and effort by purchasing a pre-spliced package. To determine your required rope/chain size, check your windlass manual. Includes stainless steel ht g4 chain professionally spliced to double braided nylon anchor rope.

 

Five Oceans S612 Horizontal Windlass 500W - 14 HT-G4 chain – 12” rope – BC 3930
Five Oceans S612 Horizontal Windlass 500W – 1/4″ HT-G4 chain – 1/2” rope – BC 3930
Five Oceans S612 Horizontal Windlass 500W – 1/4″ HT-G4 chain – 1/2” rope – BC 3930 - Installation details if the deck is not flat, a suitable mounting pad may be required to take up camber or sheer. 35′ (115lb. Power pull (kgs/ib) 540/1200 type horizontal product number 3930. Package includes (wiring and fasteners are not included), solenoid, circuit breaker, up/down switch, foot switches, manual specification boat length to 20′ rode type rope/chain rode size 5/16″ ht chain, 9/16″ rope speed up/min. This five oceans s612 horizontal windlass has a stylish look, 100% stainless-steel design sit elegantly on the deck. Not to mention, it’s fitted with a heavy-duty control arm and stripper. These are adequate for most installations. Decks that are thin, or of foam or balsa laminate construction, will require reinforcement in order to spread the loads that will be applied to the deck while the windlass is in use. ) Speed down/min 82′ maximum pull 1200 lbs (540 kg) motor 600w voltage 12 volts current draw(a) 20 amps max. For powerboats and sailboats. It includes an impact-resistant motor cover, solenoid and reed switch magnet fitted as standard for chain counter. Noteworthy is the “failsafe” gypsy lock that prevents accidental deployment while underway. The standard (1/4″) threaded mounting studs supplied suit deck and packing thickness of up to 50 mm (2″). Working load (kgs/ib) 180/400 max.

 

Marine up Down Control Switch for Anchor Windlass - Five Oceans
Marine up & Down Control Switch for Anchor Windlass – Five Oceans
Marine up & Down Control Switch for Anchor Windlass – Five Oceans - To operate your windlass safely in all weather conditions you need top quality switch gear that can stand up to the elements. Windlass up/down switch this compact switch allows up/down operation from any remote station. It does not handle windlass current draw, but easily handles solenoid current. Bada switchgear is designed to ensure safe operation and long service life of your equipment.