Amarine-made Stainless Steel Mounted Stainless Steel 2 Tube Tournament Style Single Rod Holder, Transom Mounted – 90 Degree
- This product is a 100% brand new amarine-made productmade of stainless steel 304. Stainless steel clear (silver) tulip rod holder tournament style twin rod holder. Rubber insert to protect your fishing rod from any wear against the stainless surface. Mounted on a 3″ x 4″ 4 hole pad clear (silver) tulip rod holder. Rod holder can be adjusted to 32 different angles when mountedeasy to install.
Amarine-made Adjustable Stainless Steel Tournament Style Single Rod Holder, Transom Mounted, Wall Mounted , Top Mounted – Angle Adjustable – With Hex Wrench – SH9020
- Stainless steel clear (silver) tulip rod holder tournament style single rod holder. Mounted on a 3″ x 4″ 4 hole pad clear (silver) tulip rod holder. Stopper slot built into the base of the rod holder to located the rod butt into position. Angle of rod holder is be adjustable from forward to backward with hex wrench. Rubber insert to protect your fishing rod from any wear against the stainless surface.
C.E. Smith Single Rod Holder – White
- Until you mount several of these on your boat. Mount using up to ¼” fasteners (not included). One piece molded polypropylene construction is tough and corrosion free. 12″ tall. There never seems to be a rod holder where you need one. White single rod holder 55115asingle rod holder mounts anywhere to keep rods clear.
RITE-HITE Single Fishing Rod Holder – Holds Your Fishing Rod/Reel at the Optimum Angle. Great for Bank Fishing on Lakes and Streams
- Constructed of powder coated 1/4″ diameter steel for years of corrosion-resistant durability. An 18″ cradle rod holder keeps rods safely off the ground and tilted in prime fishing position. It also secures your rod so it won’t be carried away by the big one.
Shoreline Marine Rod Holder Single Basic Wht Tube
- Stainless steel hardware included. Item features heavy duty molded construction with uv inhibitors for superior performance. Smooth finish easily cleans up soap and water. Single tube rod holder adds convenience wherever installed.
C.E. SMITH C.E. Smith Single Rod Holder – White / 55115A /
- With square tube mounted kit as square rail adjustable clamp-on rod holder for rail from 1″ to 1-5/8″ tube. Stopper slot built into the base of the rod holder to located the rod butt into position. Mpn 55115a. Normal angle of rod holder is 0 degrees to base and be adjustable around shaft. Stainless steel clear (silver) tulip rod holder tournament style single rod holder.
Amarine-made Stainless Steel Mounted Stainless Steel 2 Tube Tournament Style Single Rod Holder, Transom Mounted – 90 Degree
- Stainless steel clear (silver) rod holder tournament style twin rod holder. Rubber insert to protect your fishing rod from any wear against the stainless surface. This product is a 100% brand new amarine-made productmade of stainless steel 304. Mounted on a 3″ x 4″ 4 hole pad clear (silver) tulip rod holder. Rod holder can be adjusted to different angles when mountedeasy to install.
C.E. Smith Single Rod Holder – Black
- Until you mount several of these on your boat. Mount using up to ¼” fasteners (not included). There never seems to be a rod holder where you need one. Black single rod holder 55116asingle rod holder mounts anywhere to keep rods clear. 12″ tall. One piece molded polypropylene construction is tough and corrosion free.
Amarine Stainless Steel Tournament Style Single Rod Holder, Transom Mounted, Wall Mounted – 20 Degree
- Stainless steel clear (silver) tulip rod holder tournament style single rod holder. Mounted on a 3″ x 4″ 4 hole pad clear (silver) tulip rod holder. Normal angle of rod holder is 20 degrees. Stopper slot built into the base of the rod holder to located the rod butt into position. Rubber insert to protect your fishing rod from any wear against the stainless surface.
Amarine-made Adjustable Stainless Steel Tournament Style Single Rod Holder, Transom Mounted, Wall Mounted, Top Mounted Rod Holder – 90 Degree with Hex Wrench
- Stopper slot built into the base of the rod holder to located the rod butt into position. Mounted on a 3″ x 4″ 4 hole pad clear (silver) tulip rod holder. Normal angle of rod holder is 90 degrees and adjustable around shaft with hex wrench. Stainless steel clear (silver) tulip rod holder tournament style single rod holder. Rubber insert to protect your fishing rod from any wear against the stainless surface.
SCOTTY #2106 Scotty 2106 HP Depthpower Electric Downrigger 60 SS Telescoping Boom w/ Swivel Base – Single Rod Holder
- / Min, and 10 lb. Weights at 312 ft. / Min. Pre-spooled with the hp stainless steel downrigger wire, the hp models have unbeatle pulling power lifting 20 lb. High performance electric downriggerthe high performance downrigger features a new illuminated digital line counter as well as the sleek new rocket launcher rod holder. 1 1/4″ dia. Includes36″, 60″ telescoping stainless steel boom. Of 180 lb. Test, 316 stainless steel downrigger wire1/2″ kevlar drive belt by optibelt tm, the same belts used by superior european auto manufacturersclutch brake with the largest braking surface in the industryboom mounted adjustable rocket launcher rod holderswivel pedestal mount. Weights with ease at 260 ft. Illuminated, resettable, sealed and silent digital line counter300 ft.
C.E. Smith Single Rod Holder – Black
- 12″ tall. One piece molded polypropylene construction is tough and corrosion free. Until you mount several of these on your boat. Single rod holder mounts anywhere to keep rods clear. There never seems to be a rod holder where you need one.
Amarine Wall Mounted Aluminum Tournament Style Single Rod Holder, Transom Mounted – 90 Degree
- Rubber insert to protect your fishing rod from any wear against the aluminum surface. Stopper slot built into the base of the rod holder to located the rod butt into position. Normal angle of rod holder is 90 degrees. Mounted on a 37″ x27 ” 4 hole pad aluminumrod holder. Aluminum rod holder tournament style single rod holder.
Dolphin single rod holder/fishing console boat t top rod holder anodized
- A quick wash, rinse and wipe down after a great days fishing is all it needs. The single rod holders will clamp to your t-top, hardtop, tower, radar arch, rail or any structure made from 2 inch, 1. No hard polishing to get these puppies looking great all the time. The smooth clear anodised finish to the twin tubes and clamps makes these rod holders so easy to keep clean. The clamp size is 2 inch, we supply a rubber insert for 1. There is a laser engraved logo along the tube so you know you are purchasing the genuine article from dolphin. The clamp will allow the rod holders to be adjusted at 18 degree intervals. The clamp fitting is cnc machined from solid 6061 aircraft aluminium. You will have a place for you fishing rods in a safe place off your floor. The rubber insert will protect your dolphin t top frame. The single rod holders can be angled by rotating the clamp around your frame and also side to side with the adjustable clamp. 5inch pipe. Now you can angle the rods sideways to an angle that suits your needs. The rod holder are cold-drawn tubing which is smooth polished and anodised for superior protection. We source and only use high quality raw materials for pure performance to look after your gear. The original dolphin single rod holders were created to hold 1 rod and adjustable every 18 degrees. 5inch size tubing. All our hardware is 316 stainless steel bolts for secure holds, strength and durability in the harsh marine environment.
Amarine Wall Mounted Aluminum Tournament Style Single Rod Holder, Transom Mounted – 90 Degree
- Normal angle of rod holder is 90 degrees. Rubber insert to protect your fishing rod from any wear against the aluminum surface. Mounted on a 37″ x27 ” 4 hole pad aluminumrod holder. Aluminum rod holder tournament style single rod holder. Stopper slot built into the base of the rod holder to located the rod butt into position.
Amarine-made Adjustable Stainless Steel Tournament Style Single Rod Holder, Transom Mounted, Wall Mounted , Top Mounted – Angle Adjustable For Rail 1-5/8″ to 2″
- Can be mounted to vertical or horizontal rails, adjustable for rails 40mm (1 5/8″) to 50mm (2″) diam. Stopper slot built into the base of the rod holder to located the rod butt into position. Rubber insert to protect your fishing rod from any wear against the stainless surface. Angle of rod holder is be adjustable with wrench. Stainless steel clear (silver) tulip rod holder tournament style single rod holderthis product is a 100% brand new amarine-made product.
Amarine Wall Mounted Stainless Steel Tournament Style Single Rod Holder, Transom Mounted – 90 Degree
- Normal angle of rod holder is 90 degrees. Stopper slot built into the base of the rod holder to located the rod butt into position. Mounted on a 3″ x 4″ 4 hole pad clear (silver) tulip rod holder. Stainless steel clear (silver) tulip rod holder tournament style single rod holder. Rubber insert to protect your fishing rod from any wear against the stainless surface.
Big Jon Mutli-Axis Ii Single Rod Holder
- Single multi-axis ii rod holder -silver. Big jon’s “multi-axis ii rod holder” is so easy to use, that you can adjust it to any of nine positions, with just one hand it’s now even more adjustable, allowing you to rotate the base 360° on the vertical and horizontal axises with just one hand easy to follow mounting instructions included.
Amarine-made Adjustable Stainless Steel Tournament Style Single Rod Holder, Transom Mounted, Wall Mounted , Top Mounted – 20 Degree with Hex Wrench
- Mounted on a 3″ x 4″ 4 hole pad clear (silver) tulip rod holder. Stopper slot built into the base of the rod holder to located the rod butt into position. Stainless steel clear (silver) tulip rod holder tournament style single rod holder. Rubber insert to protect your fishing rod from any wear against the stainless surface. Normal angle of rod holder is 20 degrees and adjustable around shaft with hex wrench.
Yak Gear Build A Crate Kit Single Rod Holder
- Installation instructions and hardware included. Efficiently take advantage of storage space. Single kit does not offer accessory storage because it does not come with mounting brackets. 12 inch long and feature trigger cut outs to properly rest and secure reels. Water proof silicone recommended but not included.
Amarine Wall Mounted Stainless Steel Tournament Style Single Rod Holder, Transom Mounted
- Rubber insert to protect your fishing rod from any wear against the stainless surface. Mounted on a 3″ x 4″ 4 hole pad clear (silver) tulip rod holder. Rod holder can be adjusted to 32 different angles when mounted. This product is a 100% brand new amarine-made product. Stainless steel clear (silver) tulip rod holder tournament style single rod holder.
C.E. Smith Single Rod Holder – White
- There never seems to be a rod holder where you need one. Single rod holder mounts anywhere to keep rods clear. Until you mount several of these on your boat. One piece molded polypropylene construction is tough and corrosion free.
C.E. Smith Single Rod Holder – White
- 12″ tall. Until you mount several of these on your boat. Mount using up to ¼” fasteners (not included). There never seems to be a rod holder where you need one. One piece molded polypropylene construction is tough and corrosion free. White single rod holder 55115asingle rod holder mounts anywhere to keep rods clear.
C.E. Smith – Ce Smith Single Rod Holder White “Product Category: Boat Outfitting/Rod Holders”
- One piece molded polypropylene construction is tough and corrosion free. Ce smith single rod holder white, white single rod holder, 55115a, single rod holder mounts anywhere to keep rods clear. – mount using up to ¼” fasteners (not included)., 12″ tall. Until you mount several of these on your boat. There never seems to be a rod holder where you need one.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
