21 Top Picatinny Rail Scope Mounts for 2020

 

Evolution Gun Works Browning AB3 Long Action Picatinny Rail Scope Mount 20 MOA Ambidextrous 43402 - The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the usa. This mount is a picatinny-style base and compatible with picatinny or weaver scope rings. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. Please call us if you are interested in placing a custom order). Add egw’s practical or hd scope rings to make it a complete overhaul we machine these in our shop using one of our usa-made fadal machining centers. The center spread is the distance between the two middle holes, center to center, on your receiver. Installation egw recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately). The ab3 (a-bolt 3) mount is available in 0 or 20 moa. Please see our faq page for further information on moa. 064″ height 0. Machined from domestic 6061 t6 extruded aluminum finish matte black only mounting hardware #8-40 x 1/4 screws and t-10 bit included ab3 center spread 3. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. After machining, the mounts are tumbled, sand blasted, and type ii anodized for long lasting durability. 32″ this mount comes standard with a bevel on both sides making it ambidextrous. 862″ overall length 7. Egw’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike. We recommend 0 moa, if shooting 0-500 yards 20 moa, if shooting 500-1000 yards when zeroing your rifle with a 20 moa mount, we recommend zeroing at 200 yards. Custom silver anodizing is available upon request, for an additional charge of $15 (a lead time of approximately 3 months is also associated with this custom anodizing. Also, in many cases, it will not obstruct usage of factory iron sights.

 

Evolution Gun Works Savage Round Back Short Action Picatinny Rail Scope Mount 20 MOA Ambidextrous - Egw scope base savage round back sa picatinny rail 20moastyle 1-pc mil-std 1913 picatinny finish black-matte material aluminum alloy type of rings needed mil-std 1913 picatinny rings included n other features made in usa, this savage base will work with any short action round back savage with an ejection port manufacturer evolution gun worksmodel no 41002.

 

EGW Savage Round Back Short Action Picatinny Rail Scope Mount 20 MOA Silver -  . The round back on this mount will accommodate rounded receivers, and guns that have an accu-trigger. Egw’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike. This mount is a picatinny-style base and compatible with picatinny or weaver scope rings. This savage base will work with any short action round back savage rifle with an ejection port. Installation egw recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately). Add egw’s practical or hd scope rings to make it a complete overhaul .  .  . Overall length 6. 670″.  . The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average.  .  . Also, in many cases, it will not obstruct usage of factory iron sights. Mounting hardware hex head screws and wrench provided center spread 3. This mount is available in 0 or 20 moa. Savages without an accu-trigger will require our flat back mount (listed separately). The middle spread is the distance between the two middle holes, center to center, on your receiver. 930″.  . Machined from domestic 6061 t6 extruded aluminum finish silver anodized. Please see our faq pages for more information on action lengths and moa. Available in matte black or silver-anodized. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories.  .

 

EGW T/C Contender Picatinny Rail Scope Mount, 20 MOA - After machining, the mounts are tumbled, sand blasted, and type ii anodized for long lasting durability. This mount is a picatinny-style base and compatible with picatinny or weaver scope rings. 838″. The center spread is the distance between the two middle holes, center to center, on your receiver. The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the usa. This base sits at approximately 0. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Please call us if you are interested in placing a custom order). Finish matte black. Custom silver anodizing is available upon request, for an additional charge of $15 (a lead time of approximately 3 months is also associated with this custom anodizing.  . Center spread. Overall length 5. Add egw’s practical or hd scope rings to make it a complete overhaul we machine these in our shop using one of our usa-made fadal machining centers. Machined from domestic 6061 t6 extruded aluminum. Also, in many cases, it will not obstruct usage of factory iron sights. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. Egw’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike. Our tc contender mount is made specific to the gun, and will fit both rifles and pistols.  . Mounting hardware hex head screws and wrench provided. Installation egw recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately). 4″” high. 488″.

 

Evolution Gun Works Savage Round Back Long Action Picatinny Rail Scope Mount 20 - Egw scope base savage round back la picatinny rail 20moastyle 1-pc mil-std 1913 picatinny finish black-matte material aluminum alloy type of rings needed mil-std 1913 picatinny rings included n other features made in usa, this savage base will work with any long action round back savage with an ejection port other features2 will not fit the 212 manufacturer evolution gun worksmodel no 41102.

 

Ulightfire 25.4/30mm in Diameter Mount Ring with Extension Picatinny Scope Mount Rail - Made with lightweight aluminum precisely , light weight and durability is guaranteed. Material aluminum alloy size 45 x 41 x 41 mm weight approx 30 g. It’s possible to install it on a 20 mm dovetail rail with the wrench attached. 20 mm width rail suitable for attaching a flashlight, dot site, scope etc to your equipments.

 

Remington 710/770 Picatinny Rail Scope Mount - 670″.  . 460″. Add egw’s practical or hd scope rings to make it a complete overhaul . This mount is a picatinny-style base and compatible with picatinny or weaver scope rings. This mount is available in 0 moa only. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Available in matte black. Egw’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike.  . Installation egw recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).  . This scope mount fits the remington 710/770. Finish matte black . Overall length 6. Custom silver anodizing is available upon request, at an additional charge of $15 (there is also a 3 month lead time associated with silver anodizing. Hardware hex head screws and wrench provided. Center spread 2. Machined from domestic 6061 t6 extruded aluminum. Also, in many cases, it will not obstruct usage of factory iron sights. Please give us a call if you’d like to place a custom order).

 

EGW Remington 788 Standard Action Picatinny Rail Scope Mount 0 MOA - 29″. The middle spread on our standard action mount is 3. 223 22-250 long actions cailbers. We recommend 0 moa, if shooting 0-500 yards 20 moa, if shooting 500-1000 yards. 222. Machined from domestic 6061 t6 extruded aluminum finish matte black hardware hex head screws and wrench provided center spread 2. 882″ our remington 788 standard action and long action mounts are made specific to the guns. 00″. Please review the below caliber chart to assure that you order the correct mount standard actions calibers. The middle spread is the distance between the two middle holes, center to center, on your receiver. 993″ overall length 5. 243 6mm 7mm08 this mount is available with a 0 or 20 moa. 308. The middle spread on our long action mount is 3.

 

EGW Savage A17 Picatinny Rail Scope Mount 20 MOA - 181″. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Available in matte black. Add egw’s practical or hd scope rings to make it a complete overhaul . Also, in many cases, it will not obstruct usage of factory iron sights. Machined from domestic 6061 t6 extruded aluminum. 882″. Egw’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike. Installation egw recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately). Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. Overall length 5. This mount is a picatinny-style base and compatible with picatinny or weaver scope rings. Please give us a call if you’d like to place a custom order). Finish matte black. Our savage a17 mount is made specific to the gun. Center spread 3. Mounting hardware hex head screws and wrench provided. Custom silver anodizing is available upon request, at an additional charge of $15 (there is also a 3 month lead time associated with silver anodizing.

 

EGW Savage 93 (1-5/8″ Ejection Port) Picatinny Rail Scope Mount 20 MOA - The difference between these mounts is the size of the ejection port. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The bolt pattern on this mount works for savage mark ii and 93 rifles. If your gun is an older production mark ii, it will have a 1-3/8 ejection port. These mounts are available in 0 or 20 moa. Please give us a call if you’d like to place a custom order). Savage 93 mount, 1/-5/8″ ejection port if your gun is a savage 93, it will have a 1-5/8″ ejection port. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Please see our faq section for more information on deciding which moa is right for you. Please measure the size of your ejection port prior to ordering to ensure the right fit. This mount is a picatinny-style base and compatible with picatinny or weaver scope rings. Add egw’s practical or hd scope rings to make it a complete overhaul available in matte black. Also, in many cases, it will not obstruct usage of factory iron sights. Egw’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike. New production mark ii rifles have a 1-5/8″ ejection port and require the use of our savage 93 mount. Installation egw recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately). Custom silver anodizing is available upon request, at an additional charge of $15 (there is also a 3 month lead time associated with silver anodizing. Savage mk ii mount, 1-3/8″ ejection port the savage mk ii mount will also fit the savage mk i.

 

Evolution Gun Works HD Savage Round Back Short Action Picatinny Rail Scope Mount 20 MOA NEW - Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. After machining the mounts are tumbled and sand blasted. Add egw’s hd scope rings to make it a complete package from manufacturing to packaging, egw’s products are made with pride in the usa. The steel rails are mil spec parkerized for a durable rust resistant finish. Machined from solid 7075 t6 aircraft grade aluminum. 002″. The aluminum mounts are type iii hard coat anodized for long lasting durability. The center spread is the distance between the two middle holes, center to center, on your receiver. The cross slots are also machined the full width of the mount and gauged to mil-std 1913 specs maintaining tolerances of +/-. Compatible with picatinny or weaver scope rings. These scope mounts are now ambidextrous. These bases sit at approximately 0. 670″. Overall length of mount 6. 35 high. Center spread 3. 93″.  Compatible with picatinny or weaver scope rings. Finish matte black only. Installation egw recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).  Mounting hardware socket head torx screws and wrench provided.

 

EGW Tikka T3 Picatinny Rail Scope Mount 20 MOA – Black - If you require metric screws, please select that option. Our tikka t3 mount is provided with standard 6-48 screws, as tikkas produced after 2004 are drilled at tapped for 6-48 screws. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Add egw’s practical or hd scope rings to make it a complete overhaul we machine these in our shop using one of our usa-made fadal machining centers. Your gun may require metric screws. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. Egw’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike. After machining, the mounts are tumbled, sand blasted, and type ii anodized for long lasting durability. Also, in many cases, it will not obstruct usage of factory iron sights. This mount is a picatinny-style base and compatible with picatinny or weaver scope rings. The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the usa. Installation egw recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately). We are happy to provide whichever size screws you need.

 

Evolution Gun Works HD Kimber 84 Long Action Picatinny Rail Scope Mount 0 MOA - Machined from solid 7075 t6 aircraft grade aluminum. 670″. After machining the mounts are tumbled and sand blasted. This mount is made specifically for the kimber 84 long action. Center spread 3. Installation egw recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately). These bases sit at approximately 0. Add egw’s hd scope rings to make it a complete package from manufacturing to packaging, egw’s products are made with pride in the usa. The steel rails are mil spec parkerized for a durable rust resistant finish. Finish matte black only. The aluminum mounts are type iii hard coat anodized for long lasting durability. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. 35″ high. Compatible with picatinny or weaver scope rings. Compatible with picatinny or weaver scope rings. Mounting hardware socket head torx screws and wrench provided. The cross slots are also machined the full width of the mount and gauged to mil-std 1913 specs maintaining tolerances of +/-. Overall length of mount 6. 88″. 002″.

 

Evolution Gun Works Remington 783 Short Action Picatinny Rail Scope Mount 20 Moa - Center spread 3. Add egw’s practical or hd scope rings to make it a complete overhaul . Please give us a call if you’d like to place a custom order). The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average.  . 670″. Custom silver anodizing is available upon request, at an additional charge of $15 (there is also a 3 month lead time associated with silver anodizing. Available in matte black. Installation egw recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately). This base is available in 0 and 20 moa.  . This mount is a picatinny-style base and compatible with picatinny or weaver scope rings. This scope mount fits the remington 783 short action.  . 242″. Finish matte black . Please see our faq page for further information on moa. Overall length 6. Machined from domestic 6061 t6 extruded aluminum. Egw’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike. Hardware hex head screws and wrench provided. Also, in many cases, it will not obstruct usage of factory iron sights.

 

EGW Remington 870 Shotgun Picatinny Rail Scope Mount - Egw scope base rem 870 picatinny railstyle 1-pc mil-std 1913 picatinny finish black-matte material aluminum alloy type of rings needed mil-std 1913 picatinny rings included n other features made in usa manufacturer evolution gun worksmodel no 40800.

 

EGW Mossberg Patriot/ATR 100 Short Action Picatinny Rail Scope Mount 0 MOA - Installation egw recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately). Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The middle spread is the distance between the two middle holes, center to center, on your receiver. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights. Egw’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike. Add egw’s practical or hd scope rings to make it a complete overhaul this mount is a picatinny-style base and compatible with picatinny or weaver scope rings.

 

EGW Mauser Picatinny Rail Scope Mount, Large Ring, 20 MOA - Machined from domestic 6061 t6 extruded aluminum. This mount is a picatinny-style base and compatible with picatinny or weaver scope rings. Overall length of mount 6. 676″. Santa barbara mauser. Please call us if you are interested in placing a custom order). Interarms model x. Egw’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike. Installation egw recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately). Center spread 3. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. Our mauser 98 scope mount does not fit the 3000 l. 4″” high. After machining, the mounts are tumbled, sand blasted, and type ii anodized for long lasting durability. The center spread is the distance between the two middle holes, center to center, on your receiver. This mount fits. Parker hale 1200. Also, in many cases, it will not obstruct usage of factory iron sights. Fn mauser action. 825″. Custom silver anodizing is available upon request, for an additional charge of $15 (a lead time of approximately 3 months is also associated with this custom anodizing. Add egw’s practical or hd scope rings to make it a complete overhaul we machine these in our shop using one of our usa-made fadal machining centers. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Mounting hardware hex head screws and wrench provided. The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the usa. Finish matte black only. This base sits at approximately 0.

 

EGW HD Remington 700, 722, 40x Short Action 0 MOA Picatinny Rail Scope Mount - These bases sit at approximately 0. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. Fits the remington 700, 722, 40x short action 0 moa this base also fits the bergara b-14 rilfes (#6 screws), christensen arms short actions, and remington 700 ultimate muzzleloaders. The cross slots are also machined the full width of the mount and gauged to mil-std 1913 specs maintaining tolerances of +/-. Compatible with picatinny or weaver scope rings. 002″. Installation egw recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately). The bergara premier requires the base to be drilled out for #8 screws this mount comes standard with a bevel on both sides making it ambidextrous. 35″ high. The center spread is the distance between the two middle holes, center to center, on your receiver. After machining the mounts are tumbled and sand blasted. The aluminum mounts are type iii hard coat anodized for long lasting durability. Add egw’s hd scope rings to make it a complete package from manufacturing to packaging, egw’s products are made with pride in the usa. The steel rails are mil spec parkerized for a durable rust resistant finish.

 

EGW HD Tikka T3 Picatinny Rail Scope Mount 0 MOA NEW - Add egw’s hd scope rings to make it a complete package from manufacturing to packaging, egw’s products are made with pride in the usa. These bases sit at approximately 0.  Mounting hardware socket head torx screws and wrench provided. Compatible with picatinny or weaver scope rings. This mount is made specifically for the tikka t3. The center spread is the distance between the two middle holes, center to center, on your receiver. The steel rails are mil spec parkerized for a durable rust resistant finish. The aluminum mounts are type iii hard coat anodized for long lasting durability. Center spread 3. Finish matte black only. Overall length of mount 7. Machined from solid 7075 t6 aircraft grade aluminum. Installation egw recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately). Check out the tikka faq page for more info. 002″. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. After machining the mounts are tumbled and sand blasted.  Compatible with picatinny or weaver scope rings.  Metric screws are only available with hex heads. 245″. 35 high. 458″. The cross slots are also machined the full width of the mount and gauged to mil-std 1913 specs maintaining tolerances of +/-.

 

Evolution Gun Works Marlin 917, 982 Picatinny Rail Scope Mount 20 - 297″. The center spread is the distance between the two middle holes, center to center, on your receiver. Add egw’s practical or hd scope rings to make it a complete overhaul we machine these in our shop using one of our usa-made fadal machining centers. Installation egw recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately). Egw’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike. Please call us if you are interested in placing a custom order). The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the usa. Machined from domestic 6061 t6 extruded aluminum. Finish matte black only. 4″ high. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. This base sits at approximately 0. 724″. Overall length of mount 6. After machining, the mounts are tumbled, sand blasted, and type ii anodized for long lasting durability.  .  . This mount is a picatinny-style base and compatible with picatinny or weaver scope rings. Custom silver anodizing is available upon request, for an additional charge of $15 (a lead time of approximately 3 months is also associated with this custom anodizing. Center spread 2. Mounting hardware hex head screws and wrench provided. Also, in many cases, it will not obstruct usage of factory iron sights. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories.

 

EGW Remington XP/XR 100, Model 7 Short Action Picatinny Rail Scope Mount 20 MOA 4 Holes - Hardware hex head screws and wrench provided. Custom silver anodizing is available upon request, at an additional charge of $15 (there is also a 3 month lead time associated with silver anodizing. This mount is a picatinny-style base and compatible with picatinny or weaver scope rings. Finish matte black.  Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. Center spread 3. Overall length 5.  Please give us a call if you’d like to place a custom order). Installation egw recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately). Machined from domestic 6061 t6 extruded aluminum. The bolt pattern on this mount will fit the remington xp/xr 100 and the remington 7. 488″.  Please see our faq section for more information on action lengths and moa. Egw’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike.  Also, in many cases, it will not obstruct usage of factory iron sights. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. 351″. The 4 hole mount is for the newer versions with 4 holes.  The 3 hole mount is made for older versions with 3 holes. Add egw’s practical or hd scope rings to make it a complete overhaul available in matte black. This mount is available with a 0 or 20 moa.

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.