T-H Marine DPS-8-1-DP Sure-Seal Screw Out Deck Plates, 8″ – Black
- Total uv and chemical stability. Requires no tools for opening. Sure-seal deck plates provide easy access to fittings, seacocks, valves, and other systems. They are watertight with a positive “o” ring seal and no visible mounting fasteners.
Nicro N10863DW 3″ deck plate, white snap-in
- Deck plate 3. Deck plate dimensions 5-7/16″. Face plate dimensions 6-3/4″. Molded to the highest standards using top quality uv stabilizers and antioxidants.
Beckson 5″ Twist-Out Deck Plate – White
- O. D. Three seperate sealing areas, each designed to chase water away from the plate opening, assure a watertight closure. The low profile cover is self-centering, and quickly locks in place with a 1/8 twist. Twist-out deck platethe beckson twist-out deck plate is designed to conceal its mounting fasteners under the quick twist cover. 5″ hole cut 5-1/2″. The bayonet threads are non-jamming, self-cleaning and lift at the center for easy removal. 7″ i. D.
8” Pry-Out Deck Plate
- Clear plate models come with white flange rings and allows you to observe gauges or controls without the necessity of removing the center. These leak-proof abs deck plates are sealed with an innovative gasket to assure a watertight seal. Even if the gasket is removed, beckson’s patented back-up sealing wall leaves the plate watertight. Designed to provide access without the use of tools, with a single start non-jamming (no cross threading), extra strong, self-cleaning buttress thread. Screw out plates should be used in compartments where a change in oil pressure or oil canning can occur.
DECK PLATE GASKET (O-Ring) for Pry Out 8″ Deck Plates
- Requires no tools for opening. Watertight with a positive “o” ring seal. No visible mounting fasteners. Total uv and chemical stability. Beckson d8pg, becd8pg.
Beckson Marine Beckson 4″ Clear Center Screw Out Deck Plate – Black
- A back-up sealing wall leaves the plate watertight, even if the gasket is removed. Deck plates are used for access to shut-off valves or back-fastenings, inspection, and clean out for tanks and compartments. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. Center clear color black. Our clear center plates permit observation of controls or gauges and visual inspection without the necessity of removing the center. A screw-out plate should be used in compartments where a change in air pressure due to temperature or oil canning can occur. Screw-out deck platethe beckson screw-out plate was designed to provide access without the use of tools, with a single start non-jamming (no cross-thread), extra strong, self-cleaning buttress thread.
Beckson 4″ Smooth Center Screw-Out Deck Plate – Black
- Sold as seen in pictures note every computer shows colors differently all measurements are approximate hardware and instruction/installation manual not included. Material black plastic overall dimensions 6 1/8″ dia x 3/4″ d. Manufacturer beckson marine manufacturer number dp40-b#. Cutout 4 1/2″ dia mounts (6) 1/8″ dia countersunk holes.
Stainless Steel DECK PLATE KEY
- Sea dog 3356991, sdg3356991. Four styles for virtually every application (pull-ups, pry-outs, screw-downs & deck plates). Improved o-ring seal for water resistance. Outside dims 10″ inside dims 7 1/4″. Cut-out reqs 8 1/2 inch.
Sea-Dog Line Screw Out Deck Plates, deck plate white standard 5in each
- Lubricate with vaseline or teflon grease. Seadog screw out deck plates are molded to the highest standards using top quality uv stabilizers and antioxidants. Use silicone sealant on hull or deck surface when installing the deck plate. Measurements are in inches. Keep threads clean with hot soapy water. Note avoid contact with acetone or strong solvents.
6“ Boat Deck Plate with Key by Salty Reef Marine Hardware Made from Heavy Duty 316 Marine Grade Stainless Steel
- Aisi stainless steel 316 provides a long service life that will retain an attractive, clean finish with low maintenance for the discriminating yachtsman. Low profile for deck safety without loss of durability. Salty reef marine hardware dependability trusted by boaters world wide and uscg approved. 6 inch inside diameter port hole has o-ring seal around cover keeps water out.
Sea Dog 337140-1 Screw Out Deck Plate, 4-7/16″ / White
- Keep threads clean with hot soapy water. Note avoid contact with acetone or strong solvents. Injection molded abs. Lubricate with vaseline or teflon grease. Sea-dog line deck plates are molded to the highest standards using top quality uv stabilizers and antioxidants. Use silicone sealant on hull or deck surface when installing the deck plate.
Sea Dog 351399-1 Stainless Steel Deck Plate Key
- The company is the recipient of multiple industry awards for quality and efficiency. Sea-dog line is a 3rd generation family company with a history of satisfied customers stretching back to the company’s start in 1933.
Perko 12487-8DP Marine Deck Plate Key for 520 Deck Plate
- The perko inc (dp items) deck plate key is the perfect boating accessory to keep with your ever expanding tool kit.
Five Oceans 6″ Screw-in Deck Plate – BC 85
- The 6″ screw-in deck plate is designed with a rubber o-ring that creates a watertight seal for safety. Use only 100% silicone caulk with a cutout diameter 6 1/2″ (165mm). V. Overall diameter 8″ (203mm). Additionally, this particular plate style has a single-start, non-jamming (no cross-threading), extra-strong, self-cleaning buttress thread. Specification material uv-resistant asa plastic leak-proof abs deck plates u. Resistant coarse thread for easy use product number 85.
H2o 5 Inch Deck Plate (Black)
- Lubricate with vaseline or teflon grease. Keep threads clean with hot soapy water. 5 inch deck plate ( black) these deck plates are moulded to the highest standards.
SeaLux Heavy Duty 316 Stainless Steel Deck Plate for Cowl Vent, Dorade Box vent, (I.D. 3″)
- Compatible with sealux cowl vent, available in 3″ and 4″ plate size. Sealux heavy duty deck plates are made from invest cast 316 stainless steel. Mirror polished to a fine luster for a high quality addition to your boat deck. Deck plates complete with rubber ‘o’ ring for a watertight closure.
T-H Marine DPS-6-2-DP Sure-Seal Screw Out Deck Plates, 6″ – Polar White
- Requires no tools for opening. Total uv and chemical stability. They are watertight with a positive “o” ring seal and no visible mounting fasteners. Sure-seal deck plates provide easy access to fittings, seacocks, valves, and other systems.
Beckson Marine BECKSON 4-inch SMOOTH CENTER SCREW OUT DECK PLATE WHITE 4.5-inch CUT DP40-W
- 4 inch screw out deck plate access hatch cover, white. Any case or box quantities are represented for bulk orders only unless otherwise noted. Beckson screw-out plates provide access without the use of tools, with a single start, non-jamming (no cross-thread), extra strong, self-cleaning buttress thread they incorporate a self-aligning center and an innovative gasket to assure a watertight seal a unique back-up sealing wall leaves the plate water resistant, even if the gasket is removed. Deck plate fill for gasoline conveniently designed with screw mount and splash lip ideal for use with 1-1/2″ id fill hose.
T-H Marine DSSDP-1-2-DP Designer Series Screw Down Deck Plates, 6″ – White
- Designer series screw down deck plates have a textured top, smooth tapered edges and are flanged to fit into the hole securely. They are made from a tough non-corrosive poly material and are uv and chemical resistant.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
