16 Best and Coolest Bow Eyes

 

Sea Dog Bow Eye 38X5 Chrome Zinc 079135-1
Sea Dog Bow Eye 3/8X5 Chrome Zinc 079135-1
Sea Dog Bow Eye 3/8X5 Chrome Zinc 079135-1 - Zamak chrome plated. Stainless steel finishing plates, washers, and nuts included. For use on the bow or stern.

 

Four Cast Aluminum Bow Eye Weldable Tie Downs
Four Cast Aluminum Bow Eye Weldable Tie Downs
Four Cast Aluminum Bow Eye Weldable Tie Downs - 7/8″ wide at the bottom and 1/2″ on the outside of the hole. Stands 2 1/4″ off of the mounting surface. The u-bottom is 1/2″. U-bottom cast aluminum weld on bow eyes. Each one measures approximately 3 inches long. Has a 1″ hole.

 

Twin-Shank Boat Bow Eyes
Twin-Shank Boat Bow Eyes
Twin-Shank Boat Bow Eyes - Stainless steel finishing plates, washers, and nuts included. For use on the bow or stern. Zamak chrome plated.

 

SeaLux Marine AISI 316 Stainless Steel Heavy Duty Class III Bow Eye with Taper Safety Lock Nut 12 M12 Stock 4-34 Length 6000 lbs Capacity
SeaLux Marine AISI 316 Stainless Steel Heavy Duty Class III Bow Eye with Taper Safety Lock Nut 1/2″ (M12) Stock (4-3/4″) Length, 6000 lbs Capacity
SeaLux Marine AISI 316 Stainless Steel Heavy Duty Class III Bow Eye with Taper Safety Lock Nut 1/2″ (M12) Stock (4-3/4″) Length, 6000 lbs Capacity - Constructed of polished aisi 316 stainless steel, to minimize potential corrosion. Unique design with taper security lock nut, to be used together with class 3 chain and padlock to ensure safe locking and to fulfill insurance regulations. This bow eye measures approximately 3″ w x 4-3/4″ h x 3/4″ d overall and has (2) approximate 1/2″ diameter x 2-3/8″ long threaded bolts with 1 7/8″ apart center on center. Bow eye opening 1 3/4″ stainless steel taper security nuts, washers and installation instruction are included.

 

00BE600 Bow Eyes
00BE600 Bow Eyes
00BE600 Bow Eyes - 00be600 bow eyesmodel number 00be600material cast bronzeshank diameter 3/8 inchshank length 6 incheye diameter 1 inch.

 

SeaLux Marine 38 stock Fixed Welding Plate Bow Eye Stern Eye U-Bolt 4-12 Length with 3 Stud Length
SeaLux Marine 3/8″ stock Fixed Welding Plate Bow Eye Stern Eye U-Bolt 4-1/2″ Length with 3″ Stud Length
SeaLux Marine 3/8″ stock Fixed Welding Plate Bow Eye Stern Eye U-Bolt 4-1/2″ Length with 3″ Stud Length - Sealux marine 3/8″ stock fixed welding plate bow eye stern eye 4-1/2″. This u-bolt measures approximately 2 1/4″ w x 5″ h x 3/4″ d overall and has (2) approximate 3/8″ diameter x 3 1/8″ long threaded bolts with 1 7/16″ apart center on center. The clearance is approximately 1″ nuts and washer included. Constructed of polished 304 stainless steel and have welded base plates to minimize potential corrosion and offer superior sealing.

 

Amarine-made Stainless Steel Marine Boat Stern Bow Eye Tie Down U Bolt -12 Dia - 4-34 Thread Lenght - 6-12 Overall Length - 07856S
Amarine-made Stainless Steel Marine Boat Stern Bow Eye Tie Down U Bolt -1/2″ Dia – 4-3/4″ Thread Lenght – 6-1/2″ Overall Length – 07856S
Amarine-made Stainless Steel Marine Boat Stern Bow Eye Tie Down U Bolt -1/2″ Dia – 4-3/4″ Thread Lenght – 6-1/2″ Overall Length – 07856S - Includes 2 flanges and all 4 nuts. Max safe load is 3,500 lbs. Machined aisi 304 stainless, come with adjustable finished nuts. Amarine-made bow eyes come with adjustable finished nuts as compared to the crimped ring used on most bow eyes the 3/8″ shafts have rolled threads. Overall length is 6-1/2 inches — 1/2″ dia, 4-3/4″ thread lenght, 6-1/2″ overall length, 07856s.

 

Sea-Dog 079133-1  Bow Eye 2-916 Shaft
Sea-Dog 079133-1 Bow Eye, 2-9/16″ Shaft
Sea-Dog 079133-1 Bow Eye, 2-9/16″ Shaft - Sea-dog line is a 3rd generation family company with a history of satisfied customers stretching back to the company’s start in 1933. 15/16″ eye id. The company is the recipient of multiple industry awards for quality and efficiency. Galvanized shaft. Die cast chrome plated head.

 

Amarine-made Stainless Steel Marine Boat Stern Bow Eye Tie Down U Bolt -38 Dia - 3-12 Thread Lenght - 5 Overall Length - 07851S
Amarine-made Stainless Steel Marine Boat Stern Bow Eye Tie Down U Bolt -3/8″ Dia – 3-1/2″ Thread Lenght – 5″ Overall Length – 07851S
Amarine-made Stainless Steel Marine Boat Stern Bow Eye Tie Down U Bolt -3/8″ Dia – 3-1/2″ Thread Lenght – 5″ Overall Length – 07851S - Overall length is 5 inches –3/8″ dia, 3-1/2″ thread lenght, 5″ overall length, 07851s. Max safe load is 3,500 lbs. Includes 2 flanges and all 4 nuts. Amarine-made bow eyes come with adjustable finished nuts as compared to the crimped ring used on most bow eyes the 3/8″ shafts have rolled threads. Machined aisi 304 stainless, come with adjustable finished nuts.

 

BOW EYE 12-13X3-14 SS
BOW EYE 1/2-13X3-1/4 SS
BOW EYE 1/2-13X3-1/4 SS - Attwood 66261l3, att66261l3. Overall length is 4-3/4 inches — 1/2″ dia, 3″ thread lenght, 4-3/4″ overall length, 07853s. Amarine-made bow eyes come with adjustable finished nuts as compared to the crimped ring used on most bow eyes the 3/8″ shafts have rolled threads. Machined aisi 304 stainless, come with adjustable finished nuts. Max safe load is 3,500 lbs.

 

Boater Sports 54135 Twin Shank Bow Eye Made by Boater Sports
Boater Sports 54135; Twin Shank Bow Eye Made by Boater Sports
Boater Sports 54135; Twin Shank Bow Eye Made by Boater Sports - Thickness 3/8″. Material chrome. Thread length 4 7/8″. Hardware included washers and nutsbow eye 3/8″ x 4-7/8″ zamak chrome plated for use on the bow or stern stainless steel finishing plates, washers and nuts included. Same-day shipping on all orders placed by 11am est delivery delays may vary depending on the carrier free shipping on orders over $9999.

 

Attwood Stainless Steel Bow Eye
Attwood Stainless Steel Bow Eye,
Attwood Stainless Steel Bow Eye, - With stainless steel nuts and washers. 5/16 inches diameter. These rugged bow eyes, when transom-mounted, are ideal as ski tows. Stainless steel nuts and washers. Bow eyes have twin shanks to prevent twisting. 6000 pounds pull strength.

 

Stainless Steel U Bolt Bow Eye Large
Stainless Steel U Bolt Bow Eye Large
Stainless Steel U Bolt Bow Eye Large - Whitecap focuses on quality control and on-time delivery because their people are overseeing the production of our hardware. Founded in 1972 by edward tomao, whitecap industries is a family owned and operated business that has specialized in hardware for nearly 30 years. Thus, whitecap offers a lifetime warranty for your protection. We are confident that sea bowld marine hardware will exceed your expectations. Whitecap relied on their dedication to quality products when they developed a new line of marine hardware exclusively for boater’s world.

 

Amarine-made Stainless Steel Marine Boat Stern Bow Eye Tie Down U Bolt -38 Dia - 3 Thread Lenght - 4-12 Overall Length - 07850S
Amarine-made Stainless Steel Marine Boat Stern Bow Eye Tie Down U Bolt -3/8″ Dia – 3″ Thread Lenght – 4-1/2″ Overall Length – 07850S
Amarine-made Stainless Steel Marine Boat Stern Bow Eye Tie Down U Bolt -3/8″ Dia – 3″ Thread Lenght – 4-1/2″ Overall Length – 07850S - Amarine-made bow eyes come with adjustable finished nuts as compared to the crimped ring used on most bow eyes the 3/8″ shafts have rolled threads. Machined aisi 304 stainless, come with adjustable finished nuts. Overall length is 4-1/2 inches -3/8″ dia, 3″ thread lenght, 4-1/2″ overall length, 07850s. Includes 2 flanges and all 4 nuts. Max safe load is 3,500 lbs.

 

SeaLux Marine Boat Bow Eye Stern Eye U Blot Tie Down 12 Stock 5-12 Length with Nyloc Nuts and washers
SeaLux Marine Boat Bow Eye Stern Eye U Blot Tie Down 1/2″ Stock, 5-1/2″ Length, with Nyloc Nuts and washers
SeaLux Marine Boat Bow Eye Stern Eye U Blot Tie Down 1/2″ Stock, 5-1/2″ Length, with Nyloc Nuts and washers - This is a new out of the box, stainless steel bow eye from sealux marine, part number sl878805852 constructed of polished stainless steel, this u-bolt measures approximately 2 3/8″ w x 5 1/4″ h x 3/4″ d overall and has (2) approximate 1/4″ diameter x 3 1/2″ long threaded bolts with 1 7/8″ apart center on center. The clearance is approximately 1 1/4″. Specifications part manufacturer sealux marine part numbersl878805852 material polished stainless steel stud diameter 1/2″ thread length 3 1/2″ center on center 1 7/8″ bow eye opening 1 5/8″ space between studs 1 1/4″ washers and hex nylon lock nuts included sold as seen in pictures. Instruction / installation manual not included. Customers please note every computer shows colors differently. All measurements are approximate.

 

Sea Dog 080035-1 Twin Shank Bow Eye 3-12 Shaft
Sea Dog 080035-1 Twin Shank Bow Eye, 3-1/2″ Shaft
Sea Dog 080035-1 Twin Shank Bow Eye, 3-1/2″ Shaft - The company is the recipient of multiple industry awards for quality and efficiency. Machined aisi 304 stainless. Sea-dog line is a 3rd generation family company with a history of satisfied customers stretching back to the company’s start in 1933. Sea dog bow eyes come with adjustable finished nuts as compared to the crimped ring used on most bow eyes. The 3/8″ shafts have rolled threads.